[UPDATED NEW THREAD] Updated MyQ Lite Application Official Thread

dman2306 · January 7, 2020, 1:01am

UPDATED

The current version is the " 2023 Community Version" found by searching HPM for MyQ. More info is at this link.
https://www.hubitatcommunity.com/MyQ/MyQ.html

A few months ago MyQ changed their API breaking existing Hubitat integrations. I was able to get the SmartThings version ported over to HE. If you're looking for it, you can find the latest code at GitHub - dcmeglio/hubitat-myq: Integrate SmartThings with MyQ

Ryan780 · January 7, 2020, 1:38am

Can I recommend that you change the ReadMe so people don't think they're in the wrong place. Or at least remove it.

dman2306 · January 7, 2020, 1:43am

I deleted it for the time being.

eaton.blumenstein · January 7, 2020, 3:01am

I don't want to nag, but I don't understand what needs to be installed? is there any details?

jtmpush18 · January 7, 2020, 3:05am

Should I be worried about these messages:

Ryan780 · January 7, 2020, 3:13am

Did you install the correct Drivers as well?

jtmpush18 · January 7, 2020, 3:17am

Precisely what I forgot to do... I forgot that they were updated as well.

eaton.blumenstein · January 7, 2020, 7:54pm

ok.. looks like it installed, i will try as soon as i get home. BTW, the momentary button namespace was "smartthings" I had to rename it to "brbeaird"

aaiyar · January 7, 2020, 8:01pm

I'm curious - where did you install this?

I assume you're referring to the file:

github.com

dcmeglio/hubitat-myq/blob/master/devicetypes/brbeaird/momentary-button-tile.src/momentary-button-tile.groovy

/**
 *  Copyright 2015 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 *  Momentary Button Tile
 *
 *  Author: SmartThings
 *
 *  Date: 2013-05-01
 */
metadata {
	definition (name: "Momentary Button Tile", namespace: "brbeaird", author: "SmartThings") {

This file has been truncated. show original

eabyrd1506 · January 10, 2020, 2:25am

Feel free to shake your heads and laugh at me for this question, but I'm using a Samsung multi-sensor for my tilt sensor, and the device setting suggest using it without the magnet and without the three axis reporting when using it with a Garage Door. That makes no sense to me. Right now the sensor is stuck to the door & the magnet stuck to the rail, right next to the sensor. The sensor reads open / closed appropriately. How would you make this work without the magnet, or are the sensor preferences just nuts. Could you enable the tilt sensor to show open / closed vs the contact sensor? I can't figure that out if that's the idea

Thanks

Ed

Ryan780 · January 10, 2020, 3:46am

No, you have to pick one or the other. Either the magnet for open/close or the 3-axis tilt. Doing neither will make this only a temperature sensor.

eabyrd1506 · January 10, 2020, 11:12am

That makes more sense, Here are the settings I chose. The parenthesis were throwing me

Thanks

jeffsgoldstein · January 12, 2020, 8:19pm

Is there a way to disable the Are You Sure dialogue when you open/close garage?

aaiyar · January 12, 2020, 8:28pm

That's a Dashboard function that isn't unique to this app. It happens for all garage doors and locks. It might be changeable by editing the CSS for that template directly - I'm no expert on that and don't know if its possible, but perhaps someone like @Ryan780 can chime in.

Ryan780 · January 12, 2020, 8:40pm

Not using the Garage Door Control template, no. But you could use the switch template. On = open and off = close.

jeffsgoldstein · January 12, 2020, 8:43pm

I'll give that a try. Appreciate the help. Awesome app! Thanks

randy.cooper1 · January 14, 2020, 3:34pm

Is anyone else have problems with this app getting out of sync with the MyQ app? When it happens nether app works.

eabyrd1506 · January 14, 2020, 4:37pm

Yes, I've noticed it particularly with the lighting module when the physical switch is used to change state

eabyrd1506 · January 14, 2020, 4:43pm

Does anyone know how to change the coloration of the switch template to mirror the red / green of the garage door template?

Ryan780 · January 14, 2020, 5:00pm

In the dashboard? There is an option to edit the templates at the top of the menu when you open the cog wheel menu of the dashboard. It's pretty simple, i would suggest you give it a try. You won't hurt anything.