Release 2.3.9.135 Available
Changes from 2.3.8.140
Platform Changes
- Z-Wave Long Range support for C-8 and C-8 PRO hubs. (To include using Long Range, you must use SmartStart)
- Brand new Dashboards page that looks similar to Rooms, Devices, and Apps.
- New local Dashboards 2.0 with updated look/feel and drag/drop design functionality.
- Basic support for IntelliJ Idea based development using a simple hub code upload plugin.
- Improved restore confirmation dialog.
New Apps
- New Visual Rules Builder app.
New Devices
- Shelly Z-Wave Plug
- Minoston MP31ZP Smart Plug
- MCO Home Touch Panel Switch (510 Series)
- MCO Home Dimmer Switch (MH-DT511)
- Swidget Z-Wave Dimmer
- Swidget Z-Wave Switch
- Swidget Z-Wave Switch Multisensor
- Swidget Z-Wave Dimmer Multisensor
- MCO Home Occupancy Sensor
- MCO Home Air Quality Sensor (A2-ZW)
- MCO Home Micro Switch (MH-S220)
- MCO Home IR Thermostat (IR2900-ZW)
New Compatible Devices
- MCO Home TPS (MH-S511) using MCO Home Touch Panel Switch driver
- MCO Home TPS (MH-S512) using MCO Home Touch Panel Switch driver
- MCO Home TPS (MH-S513) using MCO Home Touch Panel Switch driver
- MCO Home Occupancy Sensor (OS11) using MCO Home Occupancy Sensor Driver
- MCO Home Occupancy Sensor (OS12) using MCO Home Occupancy Sensor Driver
- MCO Home Dry Contact Micro Switch (MH-DS221) using MCO Home Micro Switch driver
- Linkind Smart Dimmer Switch using Generic Matter Dimmer
- ThirdReality Garage Door Tilt Sensor using Generic Zigbee Contact Sensor (no temp)
- MCO Home IR Thermostat
Bug Fixes
- Fix configure() bug in Generic Z-wave Plus Thermostat Driver
- Fix supportedThermostatModes invalid format in Heatit Z-TRM3 driver.
- Improvements to supervision encapsulation for Z-Wave S2 devices, in built-in drivers, preventing false duplicate detection/drops on outgoing packets.
- Fixed Advanced RGB(W) driver(s) refresh issues (hopefully all of them).
- Rule 5.1:
- Fixed %date% for Stays triggers.
- Fixed Time Since Event for decimal event values.
- Fixed sendMsg method in Onkyo AVR driver.
- Fixed Z-Wave device fingerprint matching, specifically when using mfr, prod and deviceId style fingerprints.
52 Likes
Release 2.3.9.136 Available
Changes from 2.3.9.135
Platform Changes
- Added support for clock and weather tiles (for built-in OpenWeather driver) to Easy dashboards. [check this post for more details ]
- Added support for arbitrary fan/thermostat modes to Fan and Thermostat tiles on Easy dashboards.
Bug Fixes
- Removed HTML from tooltips on Logs page and Easy dashboards.
- Fixed the issue with HSM tile not updating status.
17 Likes
Release 2.3.9.141 Available
Changes from 2.3.9.136
Platform Changes
- Added cloud support for Easy dashboards.
- Added drag and drop support for local Hubitat dashboards.
Bug Fixes
- Fixed runaway background z-wave exclusion when user clicks Cancel in remove device dialog.
- Removed full device list in dashboard configuration dialog to free up screen space.
- Basic Rule: Fixed Only Between Two Times Restriction.
21 Likes
Release 2.3.9.142 Available
Changes from 2.3.9.141
Bug Fixes
- Fixed dashboard background and scrolling (bug introduced in .141).
- Easy dashboard fan icon now grays out when the fan is off.
- Easy dashboard home link now follows Navigation to - Dashboards page check in dashboard options.
- Rule 5.1: Fixed cancel rule actions for delay.
28 Likes
Release 2.3.9.143 Available
Changes from 2.3.9.142
Bug Fixes
- Fixed broken drag/drop on Hubitat dashboards with non-fixed cell width/height.
- Easy dashboard thermostat icon/background now reflect on/off status for the device.
- Fixed the cause of "Layout was Null" error message for Hubitat dashboards.
23 Likes
Release 2.3.9.147 Available
Changes from 2.3.9.143
Platform Changes
- Added Easy dashboards to legacy dashboard menu page (used by mobile app, too).
- Added drag and drop support to cloud Hubitat dashboards.
- Added a Back button to Easy dashboards if there is any browse history available (e.g. in mobile app).
New Devices
- Jasco PRO Water Leak Sensor
- Jasco PRO Plugin Smart Switch
- Third Reality Vibration Sensor
New Compatible Devices
- NodOn 1 relay module (SIN-4-1-20) using Generic Zigbee Switch
- NodOn dual relay (SIN-4-2-20) using Generic Zigbee Multi-Endpoint Switch
- NodOn metering relay (SIN-4-1-21) using Generic Zigbee Outlet
- IKEA Ormanas LED Strip using Advanced Zigbee RGBW Bulb
- IKEA TRADFRI bulb E27 WW globe 806lm using Advanced Zigbee bulb
- IKEA TRADFRI bulb GU10 WW 345lm8 using Advanced Zigbee bulb
- IKEA TRADFRI bulb E14 WS candle 470lm using Advanced Zigbee CT bulb
- frient Zigbee Range Extender REXZB-111 using kea TRADFRI Signal Repeater
Bug Fixes
- Rule 5.1: Fixed Time Since Event with variable value.
- Basic Rule: Fixed issue with Restrictions.
- Fixed optional tile toggle mix-up when creating Easy dashboard.
20 Likes
Release 2.3.9.150 Available
Changes from 2.3.9.147
Platform Changes
- Improved drag/drop on Hubitat dashboards.
- Added individual button naming to Easy dashboard button tiles.
- Added separator and media player tiles to Easy dashboards.
- Added an option to pre-populate Easy dashboard with all of the room's devices.
[check out this post for more details on the new Easy Dashboard features]
New Devices
- TouchWand WallWand
- TouchWand GP9000
Bug Fixes
- Got rid of "empty" fan and thermostat modes on Easy dashboard.
- Synchornized cloud Easy dashboard to match local Easy dashboard.
20 Likes
Release 2.3.9.153 Available
Changes from 2.3.9.150
Platform Changes
- Added PIN security to Easy dashboard and Hubitat Safety monitor tile.
- Added calendar tile to Easy dashboard.
- Added background color and icon customization to Easy dashboard.
Check out this post for more details
Bug Fixes
- Fixed some drag and drop issues with Hubitat dashboard.
- Room Lights: Fixed Physical selection for Conditions and Disable/Enable.
17 Likes
Release 2.3.9.154 Available
Changes from 2.3.9.153
Bug Fixes
- Fixed wrong buttons showing on the Add Device page.
- Fixed an issue preventing some hubs from creating backups compatible with Z-Wave LR.
- Basic Rule: Fixed error thrown with multiple thermostats selected.
New Driver Features
- Added 3-Way configuration options to Zooz Zen32/Zen72/Zen71
19 Likes
Release 2.3.9.157 Available
Changes from 2.3.9.154
Platform Changes
- Updated dashboard menu with new look/feel and a search feature.
- Improved navigation between dashboards setup page, dashboards menu page, and dashboards themselves.
New Devices
Bug Fixes
- Fixed wrong button number being pushed from Easy Dashboard.
20 Likes
Release 2.3.9.158 Available
Changes from 2.3.9.157
Platform Changes
- Improved user apps compile time.
New Compatible Devices
- Zooz ZEN37 Wall Remote using Generic Z-Wave Plus Button Controller
Bug Fixes
- Fixed Hubitat dashboard red background showing through on older browsers.
- Fixed easy dashboard sending commands to device while user moves slider.
- Possibly fixed device current state not updating immediately after event is raised.
20 Likes
Release 2.3.9.160 Available
Changes from 2.3.9.158
Platform Changes
- Hub's endpoints are now accessible using HTTP on port 8080 from 127.0.0.1 (hub itself), even if HTTPS only option is checked.
- Added endpoints to limit access to the hub to a set of IP addresses. Pressing and holding Network reset button restores access.
- /hub/advanced/limitAccess?addresses=1.2.3.4,1.2.3.5 - (use comma separated list of IPs to set value and limit access, starting with next reboot)
- /hub/advanced/limitAccess?addresses= - (empty value restores access, starting with next reboot)
- /hub/advanced/getLimitedAccessAddresses - (reads current list)
- Added one click/tap open/close for window shades to Easy dashboards.
Bug Fixes
- Fixed remote admin issue while using HTTPS only UI option.
16 Likes
Release 2.3.9.162 Available
Changes from 2.3.9.160
Platform Changes
- Modified the endpoints to limit access to the hub to a set of IP addresses to allow /apps/api requests while keeping the rest of the UI inaccessible.
- Added periodic push to the HomeKit integration to keep AppleTV/HomePod connections alive.
- Modified Easy dashboards navigation (compass button) to show item list vertically and avoid clipping.
Bug Fixes
- Fixed a bug preventing attribute writing for Matter devices.
18 Likes
Release 2.3.9.163 Available
Changes from 2.3.9.162
New Compatible devices
- Sunricher HK-SENSOR-CT-A contact sensor using Generic Zigbee Contact Sensor
New Devices
- Zooz ZSE70 Outdoor Motion Sensor
New App Features
- Maker API: Added option for date/time to be included in responses; added optional parameter to select number of events to return for Get Device Event History.
Bug Fixes
- Ensured that hub mesh endpoints remain functional even if UI access to the hub is IP limited.
- Added a user accessible log entry if app cloud response exceeds 128k maximum.
- Modified garage door tile in Easy dashboards to better reflect door status.
- Fix issues with customMirrorMe sensor mirrors not working as expected.
- Fixed battery reporting for Yale SMARTCODE_DEADBOLT_10T_W3 using Yale Zigbee Lock driver.
17 Likes
Release 2.3.9.164 Available
Changes from 2.3.9.163
Platform Changes
- Adds a support feature to allow full reset while subscriptions are active or pending cancellation.
20 Likes
Release 2.3.9.166 Available
Changes from 2.3.9.164
Bug Fixes
- Fixed Easy Dashboard leak sensor icon colors.
- Fixed Easy dashboards layouts not sync'ing across multiple browsers.
- Fixed broken dashboard menu page link on the Dashboards page.
- Updated cloud Easy dashboards to match local.
- Tweaked Bonjour announcements to improve HomeKit connection stability.
23 Likes
Release 2.3.9.174 Available
Changes from 2.3.9.166
Platform Changes
- Tweaked network and cloud reconnect logic.
- Added optional gzip compression to mobile app interface to process larger data requests.
- Added an option to disable UI access by subnet in addition to individual IPs. Below is the full list of endpoints:
- /hub/advanced/limitAccess?subnets=192.168.4.252/29,192.168.4.4/29 - (use comma separated list of CIDR subnets to set value and limit access)
- /hub/advanced/limitAccess?subnets=none - (empty value restores access)
- /hub/advanced/limitAccess?addresses=1.2.3.4,1.2.3.5 - (use comma separated list of IPs to set value and limit access)
- /hub/advanced/limitAccess?addresses=none - (empty value restores access)
- /hub/advanced/getLimitedAccessAddresses - (reads current list)
Bug Fixes
- Fixed a Hubitat dashboard bug preventing drag/drop on tile sliders. Tile drag is no longer initiated when trying to use slider.
- Replaced built-in SSL certificate with one expiring in 2034.
- Fixed MissingMethodException in z-wave notification handling.
- Fixed "GroovyRuntimeException: Cannot read write-only property: level" error.
- Fixed text overflow on Easy dashboard clock and calendar tiles.
- Fixed Visual Rule Builder scheduling issue when conditions are present.
29 Likes
Release 2.3.9.176 Available
Changes from 2.3.9.174
Platform Changes
- More Bonjour/HomeKit tweaks.
- Added hub management endpoints :
- /hub/advanced/getManagementToken - fetches hub's management token to be used with other endpoints below. This token is stored in the database.
- /management/firmwareUpdate?token=tokenValue - starts hub firmware update.
- /management/firmwareUpdateStatus?token=tokenValue - fetches current firmware update status.
- /management/clone?token=tokenValue&source=sourceHubIpAddress&sourceToken=sourceHubTokenValue - clones hub's database from the source hub, preserving current hub's management token.
- Added an endpoint to opt out from backup DNS configuration (/hub/advanced/setDNSFallback/false) and another to fetch fallback flag (/hub/advanced/getDNSFallback).
Bug Fixes
- Fixed canceling Z-Wave repair and added a separate button to cancel it if the page is reloaded in the middle of a repair.
- Fixed MissedPropertyException in Wiz dimmer driver.
20 Likes
Release 2.3.9.177 Available
Changes from 2.3.9.176
Bug Fixes
- Fixed reported DNS misconfiguration issues.
Platform Changes
- Added a "Use well known DNS servers as fallback" toggle in the Network Setup UI under DHCP section.
15 Likes