I have a Remotec ZRC-90 which I tried setting up today. Pairing the Z-Wave device was straightforward enough and it shows up in my device list. But when I press any of the buttons on the controller, its LED blinks rapidly indicating āoperation is invalidā and no events are seen for this device in Hubitat. The only events that appear for the device are ānumberOfButtonsā and ābatteryā (right after inclusion). In the debug log, I do see an entry like this for every time I pressed a button:
The payload is the same regardless of which of the 8 buttons is pressed. If I keep a button pressed down while re-loading the device page, the state variables still read ā0ā for all buttons. Iāve read through the related issues on this site (āRemotec ZRC-90 - discovered but nothing elseā, āRemotec ZRC-90ā) and they appear to report a similar problem, but nothing Iāve tried gets the buttons working ā excluding and re-including the device, creating a secondary controller, creating a primary controller, wake up and listen; the behavior remains the same. The one thing I havenāt tried is pairing the device with SmartThings, because I donāt have one of those. Any other suggestions on how I can troubleshoot and get this working?
I donāt see any driver in the device panel. The device type is correctly identified as āRemotec ZRC-90ā, with deviceId: 34064 and manufacturer: 21076. The Hubitat software is version 2.3.4.138.
Its not paired correctly as zwave plus as per your device info which is why it isnt working. You will have to follow that thread reset/exclude and re-pair it till your device info looks like what i posted
I had a thought about this - I have two of these Remotec ZRC-90s and I can't get them to activate buttons after pairing. An experiment I wanted to try was pairing them from close proximity to the hub so that an intermediate repeater isn't in the way. Sound plausible to you?
It didnāt work for me. I removed the device and re-added it in the same room as my Hubitat controller; after the device was added, I pressed some buttons and got the same results: the ZRC-90 led blinks rapidly and no events are detected by Hubitat.