[INCIDENT] ZOOZ Double Plug (MODEL ZEN25)

[erktrek]

So @aaiyar and I were part of the beta for @bcopeland's original firmware update app (before he joined HE) - We both had similar experiences with having to exclude/include again.

[RELEASE] Z-Wave Firmware Updater

I did one of these and several Zen21 switches. The firmware updated fine, but also reset the switches. If I were doing it again, here's what I would do: Replace the first switch in rules/apps with a placeholder virtual switch Update the firmware on the first switch When the update is complete, check if the switch is still paired to HE. If it is, all you need to do is replace the placeholder switch with the real switch. If it isn't, then: Exclude the switch Include the switch Replace the place…

I don't know if things have changed since HE's official app came out but it's something you might want to consider. Also when I update the firmware via a secondary controller I have to re-pair the device. I think this is true of Inovelli devices as well.