You're very welcome...glad to hear that things are progressing and your lock is up and running. My Schlage is working well w/Lock Code Manager so I'm sure yours will as well.
Happy HA-ing, and in the future you can share your growing knowledge w/another forum member.
Yep. That’s the only way it works. I have two Schlage BE469ZP and they work fine with beaming repeaters near each one (Ring Alarm Extender v2 devices).
I e just installed one of these switches (Jasco 46562) and it still added it as a dual outlet. I did switch the driver to Generic Zwave Plus driver and the switch looks to be working, but I also now have two ghost child devices. So doesn’t look like the issue is fixed.
C8 hub running latest firmware.
I was able to remove the ghosts, but switching driver to “device”. However, I’m still having issue with finding a correct driver, as the switch isn’t reporting state properly. I’ve tried a few suggestions in this thread and still can’t get it working right.
Thank you guys, I changed to the generic driver and looks to be performing well. For some reason I thought that custom driver was the right driver for this switch.
IMHO the best drivers for Enbrighten Z-Wave Plus switches & dimmers are @JasonJoel's drivers...but maybe let things ride for a bit before making a change to make sure things are settled down w/the generic drivers.
When you're ready to futz w/it again, these are the links to his Enbrighten Z-Wave Plus drivers:
Thanks guys, I will use the generic zwave driver for now and will try the custom Enbrighten driver again later. I do like having the scene functionality that that driver adds.
...and his dimmer driver can turn a dimmer into a switch...like that as I can buy all dimmers and use them wherever I want to and change their functionality between a switch and a dimmer if I change the controlled bulb to a different type. Very cool.
Now, just to confirm, my switch in question here, is the Jasco 46562 switch, not the enbrighten labeled switch, so these custom drivers are suppose to be still good for it?
GE Jasco/Enbrighten/UltraPro, etc., are all the same, just different packaging/marketing. You can use Jason's Z-Wave Plus drivers w/all of those brands, as long as the particular model fits Jason's info on his driver compatibility w/switch/dimmer models.