Unfortunately, it still requires the internet but it's nice to see it work with Hubitat.
It depends on what mechanism you choose to use to integrate the FP2 with Hubitat. I have my FP2 paired directly via HomeKit to Home Assistant. I then share the HA FP2 devices with Hubitat using the Home Assistant Device Bridge. This is all 100% local. No cloud required for these integrations to work.
The Aqara mobile phone app does use a cloud connection in order to configure the FP2 device. However, some users have blocked the FP2 from the internet afterwards, and everything continues to function (except the Aqara app, of course!)
4 Likes
The automation Pete showed also does not require internet to function. But it’s quite lame that HomeKit automation still requires you to build a complete separate automation for both when a device turns ON and when it turns OFF. And they still don’t support toggle.
This article speaks to the latest firmware update...
5 Likes
The Aqara FP2 was not nominated to participate in the final "Product of the Year Elevated by Hubitat in 2023 " list, but we can still vote for its little brother - the Linptech mmWave sensor.
4 Likes
That's just not right. It deserves this more than any other. No new device as unique and feature rich has been introduce this year that exceeds what it's capable of.
2 Likes
I am sure it will become a users' favorite in 2024, once Matter takes off (assuming they make good on their promises 
)
4 Likes
Are there any good tutorials for setting this up with hubitat (without alexa or homekit)? Picked up one but havent had much luck, guessing i need one of those two or the m2 hub?
Only other way I'm aware of currently is via Home Assistant (using the HomeKit Device integration) and Home Assistant Device Bridge to bring the zone status back into Hubitat.
Despite the name, that integraton doesn't require you are a HomeKit user. It simply uses an integration on Home Assistant to allow it to act like a HomeKit Controller (which was the former and less confusing name of it). Once the FP2 is added to the HA HomeKit Device integration, the zones you setup in the Aqara app for the FP2 will show up in HA as occupancy entities. HADB can then bring these entities into Hubitat where they show up as motion sensor devices.
3 Likes
Well, it worked directly with habitat if you m2
Hub?
No. There's no integration for that.
The FP2 doesn't need a hub. It's WiFi, not Zigbee like the FP1 was. Currently it uses HomeKit over WiFi for communication. Eventually it is supposed to support Matter over WiFi and then it should be able to work with Hubitat directly.
2 Likes
So if im understaning correctly i can just download homekit and the aqara app, set it all up and do the virtual switches in hubitat? so wouldn't need any other equipment or home assist?
1 Like
Sort of. You’re not actually “using” HomeKit per se, when you add that integration to HA. You’re just adding an integration and connecting the FP2 to that integration. The integration between HA and Hubitat happens via HADB.
You don’t need any Apple devices.
2 Likes
Awesome I’ll try and get it set up tomorrow and see how it goes. I hate how big of a pain Aqara devices are to connect… their products look awesome
1 Like
Using Home Assistant as a bridge to get Aqara devices into Hubitat is extremely useful and works very well. I have many Aqara devices. Since adding Home Assistant two years ago as a bridge, they all connect easily and stay connected. I then use Home Assistant Device Bridge to bring their state into Hubitat where I automate everything.
1 Like
You definitely need an instance of Home Assistant running on a separate piece of hardware (I.e. something aside from the Hubitat hub.)
1 Like
Agreed, that's my preferred way to run it too, but if you want to first test the waters, you can start out with a virtual machine or a docker. I started out with a Linux VM, and then moved to a Python VM (which was very fast, but limited and difficult to install), and then finally I imaged the full HA Supervised on a high endurance microSD, installed in a Raspberry Pi 4 8GB. Most of these are super easy to setup, becuase there's an image that has the HA OS and HA, plus the Add-ons all in one. That's been very stable and plenty fast for my needs.
True, but a VM or Docker has to still run on some piece of hardware other than the Hubitat Elevation hub. I was just wanting to make sure that was clear to @Davinci515.
1 Like
True. Virtual hardware running on separate physical hardware
1 Like
