OK, Reviews make it clear that there is a steep learning curve in coding...and I am experiencing that! Hub is connected and the IP websites are functioning. Switches defined. But I can't even figure out how to turn them on and off manually to confirm they are functioning. Tried a basic rule that tu…

FIXED. your suggestion to try a different driver did the trick. Funny, the automatic process picked what seemed like the right one...but I changed it from Jasco to GE/Enbrighton and the switch responded immediately to the buttons! Thank you very much for jumping in with suggestions...it gave me con…

[image] user1690: What do I do now? What devices (manufacturer/model) have you added to Hubitat? Have you confirmed you can control them from the Device page for each device (see @neonturbo 's example above)? What app did you program your automation in?

[image] user1690: coding There really isn't much if any coding... I probably should have added these to my first post. These and their other Youtube videos are very helpful to get started. https://www.youtube.com/c/Hubitat/videos [Beginners guide to switching to Hubitat Elevation ho…

Thanks 1690! Well, I did figure that much out. The buttons do nothing. The log says the commands were sent correctly. I'm using a few GE dual-outlet smart modules in Z-Wave protocol. They worked perfectly with Wink and have since been reset to factory. Hubitat recognized them and sets them up, but …

Ok. So on that same test page, scroll down. What Device Type (informally called a driver) are they using? I don't have that exact outlet, but this is a similar Zigbee one. Don't change yours to Zigbee by the way. [Device]

A single GE z-Wave dual outlet module (rebranded as Enbrighten Plug-In Smart Switch ZW4106) with one lamp plugged into Switch-1 . Hubitat recognizes it immediately and sets it up. With the device displayed on the Devices page, I select ON and OFF and even RESET. Nothing happens. Checked with Switch …

Were you able to find which driver these paired with?

Driver is Jasco Z-Wave Dual Outlet.

There are no other numbers on the unit. Both the left and right outlets are indeed Z-Wave controllable on this model. Some that look similar have a pass-through outlet on the right side,

Ok that is probably the correct driver, or at least it should work even if partially. Can you go to the Settings tab, Zwave Details page, and screenshot that. It will be a table with a bunch of columns with your devices listed. Post it here and we can see if there are issues by looking at that tab…

What can I do if my new device isn't working as expected?

Why Hubitat Elevation Ask Anything

Ranchitat July 12, 2022, 2:56am 9

Is that the 14282-3 module? (printed on the back)
@JasonJoel has one of the versions, that was working at one point.