Good morning, Just bought valve: [image] During pairing it took the drivers from my other device: Tuya Temperature Humidity Illuminance LCD Display with a Clock I changed the drivers for Sinope Water Valve (not working) and then for Tuya Zigbee Valve from @kkossev (currently installed - not wor…

Hi Package repaired. Advanced options selected. Device info: [image] Pref: [image] Still no change in command section: [image] But no error in Log: [image] Did something wrong?

Device after pressing the button OPEN started to flash several times and the screen changed after refresh: [image] but now not responding any button: [image]

The device is offline - try to pair it once again (without deleting it)

The device has left the Zigbee network again… Use this method to pair it, if your hub is a C-8 [image] 2.3.9.157 - Zigbee plugs are found but do not function Devices If you're experiencing issues pairing Zigbee 3.0 devices with your Hubitat C-8 hub, the following steps i…

Did voodoo. Command screen - no changes with the buttons. Only change is additional line in Currend States - power source line [image] Device again looks off [image]

There is still a pair-and-stay-connected problem with this device. [image] PM_Disaster: Did voodoo. Did you follow the instructions precisely? What distance from the hub are you pairing the valve? Note that the key point of the voodoo is to rebuild the Zigbee network twice. The screenshot …

Hi, Yes - I did twice and device is 30cm from HE. I'll try now what you described. It's very clearly written - thank you. Piotr

Again it's found line Temp sensor [image] I'll change drivers now and do advanced settings. Let you know

Tuya Zigbee Irrigation Valve - wrong installation drivers

Get Help Devices

kkossev July 5, 2025, 6:40pm 12

The device has left the Zigbee network again…

Use this method to pair it, if your hub is a C-8