Has anyone had any success getting a Tuya RGBCCT Zigbee 3.0 LED Controller to work? I bought this recently, but unfortunately, none of the stock drivers I’ve tried seem to be able to control it (even after a config/refresh). https://a.co/d/4PIIiys This is its fingerprint: [IMG_4333] And its da…

I see it uses standard zigbee clusters. You can give this driver a try. Might not work, but what do you have to lose, right? :slight_smile:

Well, that one gave me some current state information (ie: online, check interval, power source unknown). But still no ability to control. Logs if it helps: [image]

Perhaps @kkossev may help to adjust the driver, @Sebastien . I use the Gledopto controllers ([link here](Acabei de encontrar este item incrível no AliExpress. Dá uma olhada! R$63,61 | Gledopto zigbee 3.0 DC5-24V mini 5 em 1 rgbcct/rgbw/rgb/cct/dimmer controlador de tira de luz led para tv backlight…

These seem very interesting! Maybe I’ll just get one of those if we can’t get the one I bought to work…

@Sebastien the logs do not show anything received from the device… probably it has dropped off the Zigbee network? What is the HE hub that it paired with?

Thanks @kkossev ! It’s paired with a C-8. One of the drivers I tried showed it as online, so I assumed it was, but I would not be surprised if it had dropped off. Note that late last night, I also tried pairing it with my Hue hub and was able to control it with it. So I do have a workaround if it…

[image] Sebastien: ….. but I would not be surprised if it had dropped off. A method to check if a zigbee device is online to the hub that always works - enable the debug logging, then turn the power off and then back on. If the device is paired to the hub, you should see some messages receiv…

Well, you were right! It must not have paired correctly. The Double Luck voodoo method worked on the first try! (I had even tried pairing it without just before that…) Using the Advanced Zigbee RGBW Bulb driver works perfectly now. Thanks @kkossev !

@support_team , could the following device be setup to default to the « Advanced Zigbee RGBW Bulb » driver? It currently defaults to « device ». fingerprint profileld:"0104", endpointld:"01", inClusters:"0003,0004,0005,0006,1000,0008,0300,EF00,0000", outClusters:"0019,000A", model:"TS0505B" manufac…

[image] Sebastien: Using the Advanced Zigbee RGBW Bulb driver works perfectly now. Curious, are you using the “Tuya Advanced Zigbee RGBW Bulb” custom driver by @kkossev or the in-built “Advanced Zigbee RGBW Bulb” driver? I’m using the LM052 controller connected to a RGBCCT. Hubitat had no p…

Tuya RGBCCT Zigbee 3.0

Get Help Devices

kkossev August 24, 2024, 11:56am 9

C-8 …..

Double Luck voodoo