This looks like a good start to what I am looking for, moving from Vera and AVT / SVT, but a bit different than how I am using those. (Thermostat scheduler app like Mode Manager)
Here is my scenario:
I have a holiday cabin. In that cabin I have several rooms, and other smaller houses, each with their own temperature probe and each with their own electric heater, connected to a Fibaro wall plug. The only exception is 2 rooms that have one temperature probe and 2 heaters on 2 wall plugs. Each of these rooms has a Virtual Thermostat.
When I leave the cabin, I put my Virtual Thermostat on Eco, which means I maintain a set temperature on each of the rooms, set in the respective Thermostat. The rooms and house will cool down to this temperature and the heaters will turn on when needed.
Before I am scheduled to arrive, I have a Google calendar entry that is read by a agent that then changes the Virtual Thermostats to their Home mode, thus raising the temperature.
Then I also have another setting, which is the following: If the outside temperature is more than 6° c, then I turn off the heaters for the night, between 1 am and 6 am. At 6 am they start heating again to Home mode. If the outside temperature is lower than 6°, I leave the heaters on for the night at home temperature.
Now my question, and thank you for reading this far 
Will I be able to do a similar thing with this thermostat on Hubitat ? I see you mention that there is either a timer or not, but would I be able to use a seperate timer to accomplish my night routine ?
As for turning them on via a calendar, perhaps I can use IFTTT ? (Which was not available on Vera)
Looking forward to your answer.
