Success with Sinope TH1300ZB floor thermostat

I think this is what you are looking for?

1 Like

Thank you. Safe to assume the cooling and fan don't do anything, and the it's the 'heat setpoint', 'mode' and 'heat' that are the only actions that work for this model?

One thing I don't like this thermostat is the relay is quite loud when it's on. Way louder than my old none smart one.

Yes, I am using it just for heating my tile floor. So cooling and fan are not applicable.

Interesting? My current manual dial one is silent.
Is it like a humm or what kind of loud sound?

Not humming. Just a click of a relay just like a smart light switch relay.

Ah, interesting. So a one-time click for on/off?
Thanks for the heads up btw.

You will only hear a one time click for ON. It's very quiet for off.

1 Like

What kind of automatons are people running for this device?
I just pulled the trigger and ordered one this morning, and am excited!

I use thermostat scheduler for daily program. Added in mode for heating/reduce heating when home or away.
Couple of RM for heat when washroom door closed and lights on.

So I finally got mine running, this thing is great.
@Navat604 - I did the same thing with using Thermostat Scheduler for daily programing, but now I'd also like to introduce modes so that it's not running when 'away' or on vacation.
I'm not seeing how to do that. Did you achieve that in the same app?

I have this setting in Thermostat scheduler. Unless you are using thermostat controller maybe?

1 Like

Hi all. I realize I'm late to this thread but just successfully installed a TH1300ZB in our bathroom to control the in floor heat and was able to get it working well with the Thermostat Scheduler app. One thing I can't seem to get working though is the display backlight. The driver has a setting for 'on demand' which should turn off the display and bring it on when you hit a button but so far it just stays lit at all times. Has anyone gotten this to work?

Nope, but would be great to have the capacity. I already asked to Sinope some features for the driver but nothing has been released for the moment.

hi, i have a th1300zb and a th1500zb, i've try TH112xZB Sinope Thermostat EnergyMeter V3 driver and it's barely perfect... the only thing, i can't reed the energy consumption... do you have the same issue?


Yes same for me.

I have a motion sensor and I use it for controlling the display

I have a Sinope TH1300ZB as well. Love it. Works great for our master bathroom floor.

Curious if anyone has had a particular problem with the driver. When we use the SetThermostatMode command (whether through the device details page or via RM) to set the mode to OFF or to HEAT, nothing changes at the device level. If OTOH we use Off or Heat commands directly, everything works fine.

Anyone know what's going on? Maybe it's not a problem since there's a workaround.

Set Mode doesn't work for me also. I'm using a 3rd party driver with built in energy meter. The device never selects the right driver when pairing. And I'm guessing not all buttons on device page are functional for some reason.

name: "TH1300ZB Sinope Floor Thermostat with EnergyMerter", namespace: "sacua", author: "Samuel Cuerrier Auclair"

1 Like

Thanks I'll check it out.
EDIT: Couldn't get it to work. After saving and hitting configure, the device wouldn't respond to changes in Mode with this driver either. Hmm. No big deal. I have the workaround, so I'm not going to worry about it. But I do appreciate the idea just the same!

Mine took some time to settle down and start acting normal, like almost a day