Shelly not working correctly

[mousawm]

I find a solution here:

Problems with Shelly 2.5 switch stock driver

@mike.maxwell I’ve got a problem: my shelly 2.5 switches does’nt work properly anymore: I can switch them on/off from the device screen, but the status (on/off) and power does’nt refresh until I push Refresh button I cannot use the device in a dashboard, that is: I can switch it on but the tile get stuck with the hourglass icon If I switch on/off the device from Shelly app dashboard the tile does not update Of course I rebooted the hub, uninstalled/installed the device (both in Shelly and…

or you can type it manually from this post:

Problems with Shelly 2.5 switch stock driver

For Shelly 1 and Shelly 2.5 there is no need to rollback the firmware. The IO/URL actions are webhooks, instead of rolling back the firmware simply manually update these webhooks. Hubitat uses the following patterns for the webhooks: http://ip_address:39501/device_type/switch_id/action ip_address: IP for your hubitat 39501: port used by my hubitat for these callbacks. I am guessing it's the same for everyone, but if it does not work check the URL Actions for a working switch to confirm. d…