This is pretty darn awesome! Thanks a million!
1 Like
@krlaframboise I’ve got a Z-Wave lock shared to ST through OH and it works as a lock device in ST, but Smart Locks doesn’t seem to recognize the status of the virtual lock. Is this a known limitation?
Also, are you planning to release a virtual button DH in the future? Thanks!
Have you tried toggling the lock in either Hubitat or ST to see if that makes a difference?
The button capability is a pain to work with and there are some other things ahead of it, like adding Modes, so I probably won't get to it for at least a couple of weeks.
Have you tried toggling the lock in either Hubitat or ST to see if that makes a difference?
Yes, the locks work as devices properly (the virtual device state is displayed properly and functions properly). I'm not exactly sure what the Smart Locks app is looking for or trying to do, but it doesn't seem to get whatever it needs from the virtual device.
Is it also possible to get a presence sensor from ST to Hubitat? Using the webcore presence and want to be able to monitor it on Hubitat.
You can send presence from ST to Hubitat with Hubitat Send Hub Events app.
1 Like
Thanks for the info!
@krlaframboise Thanks a ton for this app. Makes having devices across ST and Hubitat so much easier 
A bug to report though…
Using the stock Philips Hue integration, I have about a dozen bulbs on Hubitat, all of which seem to have gotten Device Network IDs like ‘9/10’ or ‘9/3’. Other Hub Event Pusher seems to have trouble pushing these IDs I guess because whenever the try to control them, my logs gets riddled with errors like “Other Hub Response: Success (Device ‘9’ Not Found)”.
It seemed to me like the ‘/’ is being ignored and the hence the device is not being found. Would it be possible for you to take a look at this, please?
Another minor request. Is it feasible to have the childPrefix setting support a childSuffix instead, if possible? Basically, let the user choose if the phrase would become a prefix or suffix.
Has anyone got contact sensors working within actiontiles via "other hub"? Actiontiles doesnt pick up the devices, my work around is to map to virtual switches at the moment..
Yes, I have Visionic contact sensors on Hubitat; once I authorized the OH versions in ActionTiles they show up and report battery, contact, and temperature.
Show in smartthings for me but not in actiontiles when I go to authorise the device,...
I'm not having a lot of luck with reliability. Intermittently it works, but most of the time the events are not making it to ST. Given it works intermittently, the configuration must be correct on both ends.
None the less, I refreshed the endpoints and reconfigured, and still not working. Part of the reason I'm ditching ST is reliability, but there ya go.
So can modes and HSM status be sent to ST yet? I'd like to use this to continue to use actiontiles, the dashboards simply don't work well for me.
Also, I have bulbs showing up as virtual devices in ST, but not showing up in the actiontiles app. Anyone else run into this and have a fix?
Thanks!
Mike
For the virtual bulbs issue, don't forget to go into ActionTiles, select My Locations > Home > Authorize Things and select them from the list of ST devices that you want to expose to ActionTiles.
Is it logging any errors?
None that I found, but I've finally migrated off of ST so I'm not using it any further.
1 Like
Modes is still on my To Do list, but I don't plan on implementing HSM,
I probably won't be able to implement modes for a while because I'm juggling a lot of projects, but in the meantime if you make all the mode changes in ST you can use the Official integration to sync them back to Hubitat.
@krlaframboise Sorry if this is an obvious question. It's been a while since I've had Other Hub installed because my "other hub" has been sold. Can I trigger a ST simulated contact sensor via Other Hub ? I'm hoping that I can so I can trigger TTS on Alexa via a ST simulated contact sensor, which apparently works.
I'm just wondering if this is worth pursuing, as I'm not able to enable the ST skill right now for some reason, so I can't test the idea myself.
1 Like
Is there a way of pushing Button events via other hub pusher?
I would love to keep all my devices on Hubitat and push the events to ST (Locally wound be even better).
I can’t see any button category on the settings page.
Otherwise I love that this works..
Thanks
Tim
If you enable the real-time integration for contact sensors then when the contact open/close event is created in Hubitat the virtual device in ST will change within a couple of seconds.
1 Like
