Here are the Zigbee drivers I created for the IKEA smart products that I own. In the past, some IKEA devices were not usable with Hubitat because they were using incoming group messaging. The problem was fixed in newer firmwares, so please upgrade to the latest versions before using these drivers (…

Released version 3.3.0 with the following changes: Add driver for Tradfri Open/Close Remote (E1766) - contribution from @zcorneli.iit All: Add Update Firmware command to all devices Notes: The new driver for E1766 (probably) works only with newer firmwares - tested by @zcorneli.iit on 24.4.6 T…

[image] zcorneli.iit: It should be using the same firmwre file as the E1743 I believe this is not the case. The correct OTA file is identified by looking at the first 2 identifiers in the firmwareMT property (last one identifies the version): [firmware-mt] [image] jb1: How to update via…

[image] dandanache: I believe this is not the case. The correct OTA file is identified by looking at the first 2 identifiers in the firmwareMT property (last one identifies the version): This is the detail from my E1766, updated by Tradfri hub: [Open-Close details] 117C-11C5 does appear to …

[image] zcorneli.iit: 117C-11C5 does appear to be the same firmware as the on-off controller You, sir, are right. I stand corrected. Nice find! [E1743-firmware-mt]

Hi @mike.maxwell , Can you add also 117C-1101-23089631-tradfri_control_outlet-2.3.089.zigbee please? I can test the OTA update for this device.

Thank you - the update was completed in 8 minutes! No need to restart / repair - all working OK now, thanks! dev:1602023-10-23 18:36:38.026infofingerprint profileId:"0104", endpointId:"01", inClusters:"0000,0003,0004,0005,0006,0008,1000,FC7C", outClusters:"0019,0020,1000", model:"TRADFRI control o…

Which device did you update with this firmware. Can I use it now for the E1766? Sorry, got a bit lost. Is there a way to add the latest firmware for the E1810 as well?

I've updated E1603 TRÅDFRI Control Outlet For E1766 and E1810 the firmware OTA image is different, I suppose .. .

@mike.maxwell Can you also upload the E1766 / E1743 and E1810 firmware? E1766 / E1743: https://github.com/dan-danache/hubitat/blob/main/zigbee-ota-images/images/117C-11C5-24040006-tradfri_onoff_controller-24.4.6.zigbee E1810: https://github.com/dan-danache/hubitat/blob/main/zigbee-ota-images/imag…

[RELEASE] IKEA Zigbee drivers

Custom Apps and Drivers Custom Drivers

mike.maxwell October 23, 2023, 3:27pm 65

done

Device stopped checking in but still functioning