I am constantly receiving the below error in my logs. I'm able to get to the different devices and include them in rules, etc., but wondering if there is a way to alleviate this error.
dev:46562023-04-27 12:13:28.797 PM errorQolSys IQ Alarm Panel: no messages received in 16.1118 minutes, reconnecting...
I'd advise asking in the community driver thread:
This is a set of drivers for the
QolSys IQ2, IQ2+ and IQ4 alarm panels.
Update: This driver works with the IQ4 panel, but you must be running firmware 4.1.0 or later. Also, if you want to arm/disarm through HE, you must leave six-digit codes enabled on the IQ4.
With these drivers you can:
Monitor the state of any device connected to your alarm system
Monitor the state of the alarm system itself
Arm and disarm the alarm system
Initiate an alarm condition
Change HE modes automatically when th…
Actually, should have been clearer. Everything works fine, but I do see the error "
dev:46562023-04-27 12:13:28.797 PM errorQolSys IQ Alarm Panel: no messages received in 16.1118 minutes, reconnecting.." constantly in the logs