Method to connect 2.4ghz RF remote to Hubitat?

[calinatl]

I have a device with a 2.4 ghz RF remote. That is outside the range of RF frequency that the Bond Bridge will recognize. Is there some other device or method to connect this to Hubitat?

Seems like others have had similar questions but I have not found any posted solutions.

Adding Hubitat control to an RF device (Cellular Shades)

I have a few "Dumb' Motorised blinds around the house that I would love to find a solution for. The blinds are battery operated and work via an RF remote. The remote Hunter Douglas Window Fashions* IF/RF Remote Control kit RC4U2 Looks like it transmits at 2.433 - 2.471 ghz User Manual

and

[RELEASE] Sleep Number Controller - control your Sleep Number bed and use it for presence

Thank you! I will add this to my growing number of things to hopefully help me automate one of my beds in future. I have one side with Alexa integration and the other uses 2.4ghz RF remote (Leggett & Platt Comfort Elite) and I’m trying to devise a way to control it, even if that means switching out the entire control unit to a 433mhz receiver on the bed itself.

ETA: I don't think a Zen16 or 17 will work, because I understand they handle max 24v or line voltage. My device that receives the RF signal indicates is steps down from line voltage to "Output: 29VDC, 1.8A"

[FriedCheese2006]

What is the end device?

[calinatl]

I have two - one is a similar L&P base as mentioned in the Sleep Number Thread, and the other is a ceiling fan.