Iris keypad KPD800 not pairing

[bobjv1]

I am trying to pair a Iris keypad model KPD800.
What is the exact method to pair this device?

[gdkramer]

Try using the V1 install.

[Ryan780]

@bobjv1

KPD800

That is not a supported device. The V1 Iris devices that are supported are as follows:

They can be found here.

[Terk]

The Iris v2 keypad however works great, if you can still find one on Ebay.

[lmosenk]

Hi @Terk ,

How do I pair an Iris v2 keypad to the Hubitat hub?

[Terk]

Go to Join and Reset Instructions - Hubitat Documentation
Then scroll down to V2 keypad for instructions.

[tohara2]

Although I use Hubitat I wish they would have figured out a way to make this keypad work. I still have one.

[Vettester]

[RELEASE] IRIS v1 KeyPad Driver

OK this is my iris v1 keypad I wrote. Got tired of waiting for and need to use my keypads. I will be working on this more as time goes by but its working now. So if you have a Iris v1 keypad I would like you to try this and see if it works on yours. tested on this firmware firmware: 2013-06-28 firmware: 2012-12-11 firmware: 2012-06-08 v5.7 06/28/2022 Minor changes to stop the runaway countdown if disarmed on entry by another keypad or the app. As well as better logs A was able to ge…

[iris]

[RELEASE] IRIS v1 KeyPad Driver

OK this is my iris v1 keypad I wrote. Got tired of waiting for and need to use my keypads. I will be working on this more as time goes by but its working now. So if you have a Iris v1 keypad I would like you to try this and see if it works on yours. tested on this firmware firmware: 2013-06-28 firmware: 2012-12-11 firmware: 2012-06-08 v5.7 06/28/2022 Minor changes to stop the runaway countdown if disarmed on entry by another keypad or the app. As well as better logs A was able to ge…

Its located here... Did I miss something?

The v1 keypads actually work better than v2 or v3 or anything else.

I have been working on fixing a bug in v3 where you cant cancel water/smoke alarms or turn of alarms. Because the keypad doesn't function when its disarmed.