Usually the generic drivers built in area good place to start, but if you need extra functions definitely look around for community offerings.
v6turbo:
IRIS zigbee/zwave outlet
Which generation do you have? Are they Iris 3210-L or 3210-L2? If so the generic drivers should work but again if you want more features check out these drivers:
As promised, here is my enhanced (Iris) Smart Plug driver for Hubitat. It's not just for Iris plugs, it is compatible with SmartThings branded outlets as well.
New Features:
Toggle On/Off (hardware)
Identify (Flashes the indicator LED for 30 seconds)
Reset (Resets onboard controller)
Improved Electrical Measurement Capabilities:
Enhanced Power Measurement granularity (min/max time & voltage threshold)
AC Voltage Measurement (using voltage capability)
AC Frequency Measurement
The followin…
Check the health of the Z-Wave repeaters within your Iris Smart Plugs! This driver allows you to keep tabs on whether the Z-Wave portion of the device is working and checks it every 30 minutes. This is a port of my original SmartThings driver. It enables the Z-Wave device within the SmartPlug to communicate status with the hub. Optionally, it can check the health of the repeaters every 30 minutes to make sure they're still online and communicating with the hub.
After installing this driver…
Here are community generic drivers as well if that is your thing:
Import URL
Generic Zigbee Repeater (works with IKEA Trådfri Repeater…
1 Like
