Hi all, I am not sure where to post this, but I am in a spot of trouble with this driver!
I had my ZW6HD-1RW working fine, but decided to try out this new driver. Something very wrong happened. The Switch buttons seem to have come decoupled from the actual light relay!!
The physical buttons, nor remote commands will no longer turn off or control the lights. I can see the side LEDs operate when i send remote commands, but again the command do not operated the actual lights either.
How did I break this?
I have tried changing back to the generic driver, and pressing configure, but am having no luck with that either. It there a way to recouple the buttons? Engage the relay?
I can not linger turn off my lights.
Thanks in advance.
Edit: the current states show my number of buttons at 0...?
Edit 2: When I press a button, top or bottom (dimmer buttons do not appear in the log for some reason), I get this in the debug log:
[dev:1]2025-01-14 10:36:22.083 PM debug
Basement Dimmer - Main: level is set to 95% (physical) [NOT CHANGED]
[dev:1] 2025-01-14 10:36:22.081 PM debug
Basement Dimmer - Main: switch is turned on (physical) [NOT CHANGED]
[dev:1]2025-01-14 10:35:59.124 PM debug
Basement Dimmer - Main: level is set to 95% (physical) [NOT CHANGED]
[dev:1]2025-01-14 10:35:59.121 PM debug
Basement Dimmer - Main: switch is turned on (physical) [NOT CHANGED]
