@mike.maxwell I recently added a few Sylvania smart+ flex rgbw lightstrips. They paired as generic zigbee bulbs, so I changed the driver to rgbw bulb and they’re working fine.
On the compatible list so maybe the footprint changed? Details during pairing pasted below. Thanks.
I added my Trane Z-Wave Thermostats (TZEMT400BB32MAA) to my HE config. They're regular Z-Wave, not Z-Wave Plus, but they registered just fine in-location.
I ran these for a few yrs prior to the Nests they now replace, and they're solid (require C-Wire)
In HE, they work fine with the Generic Z-Wave Thermostat driver, so their details need to be attached for automatic driver selection.
I would like to report that I have tried some Zigbee sensors that aren't officially in the list of Supported Devices but they work great. The device is the Ecolink model 4655BC0-R Zigbee Wireless Door/Window Sensors. They are auto-detected by HE using the Zigbee device pairing function. HE detects them as "Generic Zigbee Motion Sensor" but I manually changed the device type from the dropdown to be a "Generic Zigbee Contact Sensor" and they are working great.
I am using these to trigger lights on/off on interior doors in conjunction with Tasmota WiFi wall switches and it's working well for this. The delay after opening a door is about a half second to a second, which is acceptable for me.
These also report temperature if that is important for you. I am not using this functionality as of yet but I might find a way to use it later. I do have an interest in monitoring my HVAC performance but I have higher priority integrations to tackle first.
No way of knowing what the battery life is yet as I've only had them 4 days. But for an as-delivered price of about $5.30 per unit, it's worth it to me taking a chance on the battery life.
CR2450 0.5A is what the label says. I haven't taken any of them apart as there doesn't appear to be an easy way to do so without causing at least a little physical damage. The battery comes installed with a pull tab to keep it from making contact.
[Edit] Well never mind it wasn't too bad to pull it apart with some thumb power. Panasonic CR2450.
I have same problem with my monoprice motion sensor thought it was just broken I will hope to hear of fix mine seems to stay stuck active but never goes back to inactive so never sends motion back to hub
@bobbyD why are all the official integrations not here? I cant find the August Lock Pro, the CT101 thermostat, and many official devices, but I see some official integrations, such as IFTTT and ecobee?
I'm having the exact same problem. Has anyone gotten the Monoprice Motion/Temperature Z-Wave 15271 working with Hubitat C7? Are there any custom drivers for it?
If you can live with just Motion sensing, I was able to get it to work with hub firmware 2.2.2 and the Generic Motion Sensor driver (the one without Temperature). I was never able to get it to work using the dual Motion / Temperature driver. Also, I had tons of problems with 2.2.3, and I don't recall if any version worked on 2.2.3. Hopefully when 2.2.4 is released, the driver problems will be fixed and it can work for both Motion & Temperature.