Commands lag

🛎️ Get Help Devices
13

I ran the z-wave repair. No failed devices in the logs.

1 Like
14

I am running

  • protocolVersion: 4.38
  • hardwareVersion: 255
  • firmwareVersion: 2.28

It looks like I'm one version behind on the published firmware. I may try to update the firmware on those when I get a chance.

15

If he has any devices with no in/out clusters that could be a problem....

16

That's great news! Unfortunately, you may be correct that the bulbs may be causing problems. I suggest to temporarily exclude them to see if that reduces the latency (be sure to run another repair after you exclude the bulbs).

1 Like
17

Depending upon the firmware version you definitely want to update if possible. Also make sure you are never cutting power to the bulbs according to the instructions.

2 Likes
18

I don’t have a C-7, but none of my Z-wave devices have out clusters. Since it seems clusters are a Zigbee thing and are really just command classes for Z-wave; are there out clusters with z-wave? I have a Zen77 that I powered up just long enough to update the firmware, but didn’t exclude it. That was a couple months ago and it doesn’t look any different from the others. BTW, I plan to install it soon and know that having it powered off could cause problems.

19

C5 has in out clusters as does the c7. On the c7 they are at the bottom of the device page. In the c5 no in/out on the z-wave denotes a ghost

1 Like
20

Tell me you don't have Zooz ZEN25 devices ?

1 Like
21

Or 40's

22

I have 2 Zooz devices. One is a double plug and one is a multi sensor. Not sure of the generation though. How would I find that out?

23

The double plug and the 4-in-1 are both known to be spammy. The 4-in-1 should be paired without security and the plug shouldn't be used at all. I would posit that one or both is your problem. Remove them from your mesh and see how things are. Can you also post a screen shot of your z-wave details page?

24

The lag on my network was due to the double plug. Now it's fine but you should change the parameter 18 to value 1 for your double plug. Look a this thread:

2 Likes
25

So I’ve removed my 2 Zooz devices and everything is working as expected now. Nice a quick! So my Zooz devices were the problem.

So now I need to spend some time and update the devices and figure out how to fix the issues. I attempted to work on the double plug today, but it was taking me longer to figure out than I expected. I’ll have to work on it when I have more time in my schedule.

1 Like
26

So after 8 months I've finally decided to try to update my zen25 firmware and get this thing back into hubitat.

I've Included the device back into Hubitat
I downloaded the Z-wave Firmware Updater
Switched the zen25 driver to the Firmware updated
...and here is where I'm stuck.
I'm trying to locate the 2.0 firmware but I cannot seem to find a link to it anywhere. I searched the zooz site and I just keep going in circles there.

I searched through the thread that @jbilodea linked to but there is a lot of discussion there about different things.... Maybe I'm just missing it.

27

You should ask @agnes.zooz where to find it, she was helpful.

2 Likes
28

Create an account on the Zooz website and once you are approved, you will be able to download firmware updates from there for your devices.

2 Likes
29

They sent me a link through support on their website.

30

So, I've update the firmware... everything seems to be working. We'll see if I get any kind of lag now. Thanks for all of the help! I get everything set up in hubitat, forget about it and then when I need to change something or fix something I forget how everything works because sometimes I go a long time without messing with hubitat. Everything just runs.

31

What does your z-wave details page look like?

32

@rlithgow1

Z-Wave Radio Devices

Node Device ID Device Type Clusters Device Last Sent Last Received
0x02 (002) 12344 18756 in: 0x5E, 0x56, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x26, 0x27, 0x70, 0x2C, 0x2B, 0x7A, out: Dinette 2022-12-12 12:46:06am CST 2022-12-12 12:46:09am CST
0x03 (003) 12339 18756 in: 0x26, 0x27, 0x73, 0x70, 0x86, 0x72, 0x77, out: Garage 2022-12-12 6:48:03am CST 2022-12-12 6:48:03am CST
0x05 (005) 12344 18756 in: 0x5E, 0x56, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x26, 0x27, 0x70, 0x2C, 0x2B, 0x7A, out: Loft 2022-12-12 2:14:25am CST 2022-12-12 2:14:25am CST
0x06 (006) 12344 18756 in: 0x5E, 0x56, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x26, 0x27, 0x70, 0x2C, 0x2B, 0x7A, out: Stairway 2022-12-12 2:14:25am CST 2022-12-12 2:14:25am CST
0x07 (007) 12344 18756 in: 0x5E, 0x56, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x26, 0x27, 0x70, 0x2C, 0x2B, 0x7A, out: Sink 2022-12-12 7:03:01am CST 2022-12-12 7:03:01am CST
0x08 (008) 12344 18756 in: 0x5E, 0x56, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x26, 0x27, 0x70, 0x2C, 0x2B, 0x7A, out: Patio 2022-12-12 6:48:00am CST 2022-12-12 6:48:00am CST
0x0A (010) 12342 18770 in: 0x5E, 0x56, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x25, 0x27, 0x70, 0x2C, 0x2B, 0x7A, out: Touch Lamp 2022-12-12 12:46:06am CST 2022-12-12 1:50:12pm CST
0x0B (011) 12344 18756 in: 0x5E, 0x56, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x26, 0x27, 0x70, 0x2C, 0x2B, 0x7A, out: Porch 2022-12-12 6:48:00am CST 2022-12-12 6:48:00am CST
0x0D (013) 12595 18771 in: 0x5E, 0x86, 0x72, 0x59, 0x85, 0x73, 0x71, 0x84, 0x80, 0x30, 0x70, 0x7A, 0x5A, out: Stairway Motion Sensor 2022-12-12 12:29:13pm CST 2022-12-12 1:34:18pm CST
0x0F (015) 12595 18771 in: 0x5E, 0x86, 0x72, 0x59, 0x85, 0x73, 0x71, 0x84, 0x80, 0x30, 0x70, 0x7A, 0x5A, out: Studio Motion Sensor
0x11 (017) 12344 18756 in: 0x5E, 0x56, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x26, 0x27, 0x70, 0x2C, 0x2B, 0x7A, out: Foyer 2022-12-12 12:46:06am CST 2022-12-12 12:46:09am CST
0x13 (019) 1 1 in: 0x5E, 0x26, 0x70, 0x85, 0x59, 0x55, 0x86, 0x72, 0x5A, 0x73, 0x32, 0x98, 0x9F, 0x5B, 0x6C, 0x75, 0x22, 0x7A, out: Studio Dimmer 2022-12-12 1:30:07pm CST 2022-12-12 1:30:09pm CST
0x14 (020) 1 2 in: 0x5E, 0x70, 0x85, 0x59, 0x55, 0x86, 0x72, 0x5A, 0x73, 0x32, 0x5B, 0x98, 0x9F, 0x25, 0x6C, 0x75, 0x22, 0x7A, out: Studio Switch 2022-12-12 1:30:07pm CST 2022-12-12 1:30:08pm CST
0x15 (021) 1 2 in: 0x5E, 0x70, 0x85, 0x59, 0x55, 0x86, 0x72, 0x5A, 0x73, 0x32, 0x5B, 0x98, 0x9F, 0x25, 0x6C, 0x75, 0x22, 0x7A, out: Bedroom Switch 2022-12-10 11:22:25pm CST 2022-12-12 1:01:00pm CST
0x16 (022) 1 1 in: 0x5E, 0x26, 0x70, 0x85, 0x59, 0x55, 0x86, 0x72, 0x5A, 0x73, 0x32, 0x98, 0x9F, 0x5B, 0x6C, 0x75, 0x22, 0x7A, out: Bedroom Dimmer 2022-12-11 3:35:32am CST 2022-12-11 3:36:26am CST
0x17 (023) 1 5 in: 0x5E, 0x85, 0x59, 0x86, 0x72, 0x5A, 0x33, 0x26, 0x70, 0x27, 0x98, 0x73, 0x7A, out: KJ's Lamp 2022-12-12 7:03:00am CST 2022-12-12 7:03:01am CST
0x18 (024) 1 5 in: 0x5E, 0x85, 0x59, 0x86, 0x72, 0x5A, 0x33, 0x26, 0x70, 0x27, 0x98, 0x73, 0x7A, out: Brandon's Lamp 2022-12-12 7:03:00am CST 2022-12-12 7:03:02am CST
0x19 (025) 117 260 in: 0x5E, 0x26, 0x33, 0x70, 0x85, 0x59, 0x72, 0x86, 0x7A, 0x73, 0x5A, out: Downstairs Range Extender
0x1A (026) 117 260 in: 0x5E, 0x26, 0x33, 0x70, 0x85, 0x59, 0x72, 0x86, 0x7A, 0x73, 0x5A, out: Bedroom Range Extender
0x1B (027) 21559 21570 in: , out: Downstairs Thermostat 2022-12-12 1:50:03pm CST 2022-12-12 1:50:03pm CST
0x1C (028) 21559 21570 in: , out: Upstairs Thermostat 2022-12-12 1:50:03pm CST 2022-12-12 1:50:03pm CST
0x20 (032) 40963 40960 in: 0x5E, 0x25, 0x85, 0x8E, 0x59, 0x55, 0x86, 0x72, 0x5A, 0x73, 0x70, 0x71, 0x32, 0x9F, 0x60, 0x6C, 0x7A, out: Living Room Double Plug 2022-12-12 12:48:24am CST 2022-12-12 1:49:16pm CST