Well I created several very simple basic rules that do the same thing as my single basic rule did, and STILL the problem exists.
I have seen others with very similar problems whether it is the chatty device, or something happens with the hub.
The other posts I read are using other apps as well, and not basic rules, and they aren't using waits either.
Here is what happened tonight so far with my kitchen lights:
dev:4692021-06-03 19:58:27.695 infoKitchen NORTH light is 25% [digital]
dev:4692021-06-03 19:58:27.693 infoKitchen NORTH light is on [digital]
dev:4502021-06-03 19:58:27.673 infoKitchen SOUTH ceiling light is 40% [digital]
dev:4502021-06-03 19:58:27.670 infoKitchen SOUTH ceiling light is on [digital]
dev:4692021-06-03 19:58:21.811 infoKitchen NORTH light was set to 25% [physical]
dev:4692021-06-03 19:58:21.809 infoKitchen NORTH light was turned on [physical]
dev:4692021-06-03 19:58:21.793 infoKitchen NORTH light was set to 25% [digital]
dev:4692021-06-03 19:58:21.791 infoKitchen NORTH light was turned on [digital]
dev:4502021-06-03 19:58:21.781 infoKitchen SOUTH ceiling light is 40% [physical]
dev:4502021-06-03 19:58:21.779 infoKitchen SOUTH ceiling light is on [physical]
dev:4502021-06-03 19:58:21.665 infoKitchen SOUTH ceiling light was set to 40% [digital]
dev:4502021-06-03 19:58:21.663 infoKitchen SOUTH ceiling light is on [digital]
dev:4932021-06-03 19:58:20.564 infoKitchen under cabinet light was turned on [digital]
app:4912021-06-03 19:58:20.502 infoapp: When Side Yard motion illuminance is below 160 lux …
app:4912021-06-03 19:58:20.501 infoapp: finished
app:4912021-06-03 19:58:20.481 infoact: Set level Kitchen NORTH light 25
app:5522021-06-03 19:58:20.435 infoapp: When Side Yard motion illuminance is below 110 lux …
app:5522021-06-03 19:58:20.434 infoapp: finished
app:5522021-06-03 19:58:20.383 infoact: Turn on Kitchen under cabinet light
app:4912021-06-03 19:58:20.381 infoact: Set level Kitchen SOUTH ceiling light 40
app:5522021-06-03 19:58:20.379 infoevt: Side Yard motion illuminance 59
app:4912021-06-03 19:58:20.375 infoevt: Side Yard motion illuminance 59
dev:4272021-06-03 19:58:20.306 infoSide Yard motion illuminance is 59lux ****** trigger basic rule here ****
app:562021-06-03 19:58:00.276 infoMode set to Sunset from sunset -30 min
and here is the rule that triggered the lights:
I am not the only one experiencing this type of freakout with a device, and different devices as well.
Here is the thread:
Note the different devices/drivers/device control vs. a rule..... doesn't seem to be related to a specific hub/device/driver/etc., but the actual firmware the hub is running possibly.
Also note that it happened within the same minute! No wonder my hub becomes sluggish and non-responsive when this is happening!
