After several weeks of effort trying to work with Hubitat, I have found the system to be totally unreliable, sometimes certain devices will work one day and not work the following day.
A good number of individuals in the community, were very helpful, trying their darndest to be helpful, I thank you all, but I will be going back to Vera, better have a system that is outdated but functional than a system that has all the bells and whistle but is unreliable.
Looking at your history of posts it looks like you were having Z-Wave issues. Did you get them figured out? Specific issues were ghosts and Zooz 4-in-1s paired with S0 security. Fixing ghosts is critical for performance and may (or may not) require a Z-Wave stick along with Silicon Labs PC software. The older Zooz (500 series), even if paired without security, can bring your mesh down, and thus should probably be removed from your system. People here are pretty good at multi-step assistance, I'd encourage you to keep on trying.
If you still want to try to get it working (sounds like you may have already gone a different direction) feel free to post a screen shot of your zwave details page.
In general if you look at the zwave details page everything should have a route. If you have a device with no route that's likely a ghost. Removing them is usually fairly straightforward - the trickiest part is identifying what "real" device corresponds to your ghost, removing power from it, and then removing the ghost. Once the ghost is removed you can power up your working device.