Aeotec radiator valves mis-identified

[youra]

Hi all.

totally new to Hubitat, but generally quite technically minded....

I've bought a couple of Aeotec radiator valves to start with, they are being found on Z-Wave OK by the Hubitat (on version 2.2.6.129), but then being recognised as "KeyWe" Z-Wave locks, so I can do nothing heating related with them.

Any pointers as to where to start looking for the problem....?

Thanks,

Youra.

[Mr.Olsen]

Hi there and welcome!

You might try using the recently added Hubitat drivers for "Eurotronic Spirit Thermostat", the hardware is identical to Aeotec.
Simply select the drivers, click "Save Preferences", then hit "Configure".
This would be the simplest way, also you might want to try these drivers, which offer more options and work for my Eurotronic EU-TRVs:

eTRV Aeotec Radiator Thermostat and Eurotronic Spirit Z-Wave Thermostats

I got me a few Aeotec eTRVs Seem to be the same (fingerprint is different) from Eurotronic eTRV's I have played around with the ST Eurotronic DTH by Patrick Wogan (many thanks) and here's a version that is now working on HE with my Aeotec's. A big Thank You to @Mr.Olsen for testing this on his Spirit eTRVs.. Simon /** * Aeotec and Eurotronic Spirit TRV + DVC * * Copyright 2020 Patrick Wogan * Modified for Hubitat and for Aeotec eTRV by Scruffy-Sjb * * Licensed under the Apache Lice…

[simon]

I'm going to try it out

[youra]

Thank you

I had actually already installed the driver you linked to, but what I'd missed is that you actually have to apply the driver to the device for it to actually work with the device - perhaps naively I expected that step to happen automagically....
I've switched to the Eurotronic version which is a little simpler, and that's now working - thank you again !

Y.