Zigbee supporting Esp32 module with Arduino

[ilkeraktuna]

@snell

I changed my hub from Hubitat C8 to C7 and now I am able to pair with esp32-c6 with the code from:

arduino-esp32/libraries/ESP32/examples/Zigbee/Zigbee_Light_Bulb at master · espressif/arduino-esp32 · GitHub

My hub detects it as a generic light switch. But the on/off commands do nothing.
The code does not provide any logs, so I don't know what really is happening.
any ideas ?

btw, the Arduino example seems to at least pair so it is not that bad.
the problem was with my C8 hub as discussed here:

New Hub (c8) - Smartthings Contact sensor

I am still struggling with the new C8 hub. On the C4 hub I didn't have any of these issues. My latest experience: On channel 25 : everything seems to work but 2 of my presence sensors do not pair. On channel 20 : presence sensors pair fine, but my Smarttings sensors (contact & motion sensors) do not report states. (they pair but do not report states) On channel 18 : every pairing is a pain (most of the time it takes several attempts to pair a device) , but eventually everything works. So I…