Zen72- min brightness setting not followed on physical paddle

[jtp10181]

I think you have one where Zooz built the brightness correction into the firmware. They never would tell me what models and firmware they did this exactly so I could disable it in my driver.

I think you might need to turn the brightness correction off for your firmware.

Here is the simple test I came up with a while back (and if you want to know more about it click to read the full post).

@jtp10181

Any other ZEN7x model dimmer with the current firmware it is easy to test. Turn off brightness correction. Set the Min to something higher than 1%, using the paddle dim the switch to the bottom. If the level is reported as the min you set, you can turn brightness correction on if you want. If the level is reported at 1% the device is already doing it for you, leave brightness correction off.