I am having trouble with a Zooz ZEN35 remotely controlling a ZEN72 using direct association. The current setup is: LED light load controlled directly by a ZEN72, in direct association with two other ZEN72 + one ZEN35. Issue: with the light load off, and I tap the ZEN35 main button, the LED will …

I wonder if parameter 40 should be 1, to enable on/off switch mode? You're not dimming a light, you're associating with a switch.

If you’re trying to make the direct association on ZwaveJS you may need to switch back to z/ip See Zooz ZEN34 associations for reference

Thank you @velvetfoot for suggestion. Tried it, unfortunately no change. Still having issue. I am using the ZEN35 primarily as a switch (tap only) but theoretically could also use as dimmer (tap-and-hold). I'd settle for simple switch function only (i.e. Group 2). Tap-and-hold functionality doe…

@kenrok1 Hubitat is currently on Z-wave IP. I"m not using Z-wave JS.

So the main issue seems to be that the ON press on the ZEN35 does not seem to be sending any reports for ON, nothing to the hub or to associations. I would first go through and change all the settings on the ZEN35 back to the defaults (except maybe LED setting could be left alone). I don't think an…

Starting from scratch might be best since you are fiddling with a lot of things and probably lost track (that's what I do anyway :slight_smile: ) but...... How about parameter 20? You have it set to 1. [image] edit: That's probably not it either....physical control, although, maybe?

One last thing and I'll bow out, ( @jtp10181 is the guru, so listen to him), I came across this in an old thread: (that was dimmer related though) [image] [image] MmmmJason: Switch Binding What is that? Is that from the Lighting App (which I'm not familiar with)? Sounds like Zigbee. It…

Hi everyone, I had some other obligations come up but this forum has been so helpful, I want to contribute what I have learned for others: I tried a few alternatives, such as excluding -> factory resetting the ZEN35 -> re-joining to the hub. However, I still ran into the same behavior. I have run…

@jtp10181 I used your Universal Scanner (after the Z-wave Tweak driver) to access the DA settings but I noticed there are numerous Zwt properties set on the device and the Universal Scanner won't delete them even when I get explicit. I can't know if these properties are affecting anything, and/or t…

Hubitat

ZEN35 to ZEN72 Direct Association

Get Help Devices

jtp10181 June 1, 2025, 5:14pm 9

velvetfoot:

MmmmJason:

Switch Binding

What is that?

[RELEASE] Switch Bindings 2.0 Custom Apps and Drivers

Switch Bindings 2.0 Release! Today I release Version 2.0! This is a major overhaul with some great new features. (Thank you for the suggestions!) Toggles to let you choose which attributes/events to sync Syncing of Held/Released events on dimmers and switches. For example, it can start ramping the other dimmers up/down as soon as you hold the paddle on another dimmer. You don't have to wait for the Level attribute to update at the end. Now can sync Hue, Saturation, and Color Temperature Includ…

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled