Z-Wave Wall Switch Developer Question

mike.maxwell · February 4, 2018, 8:15pm

I posted our “button” implementation here:
https://community.hubitat.com/t/hubitats-button-implementation/283?source_topic_id=255

jeubanks · February 4, 2018, 8:22pm

And I get the typical don’t have access message.

mike.maxwell · February 4, 2018, 8:30pm

You need to get invited to that section, I don’t know what the criteria is, @bobbyD

mike.maxwell · February 4, 2018, 8:31pm

I have lots of buttons, so many in fact that I needed two Lutron Bridges to run everything...

ogiewon · February 4, 2018, 8:46pm

I would also love to see some of the source code for the native drivers/apps, purely as examples of how the platform’s API differs from ST. Without documentation, examples are the next best thing!

bobbyD · February 5, 2018, 7:37pm

The criteria is simple: if someone is interested in joining the developers group, he/she needs to ask @support_team to be included. Referrals are also welcome @jeubanks and @ogiewon you are now members of the developers group Happy coding!

ogiewon · February 5, 2018, 7:37pm

Thank you sir!

jeubanks · February 5, 2018, 9:47pm

Thank you very much. And with that my next posting… MQTT bridge

lmosenk · June 25, 2018, 4:02am

Did you ever get the GoControl WA00Z-1 Z-Wave Scene-Controller Wall Switch device driver working? I tried your above code and am unavailable to make it stick.

mike.maxwell · June 25, 2018, 1:02pm

Have you tried our generic zwave central scene switch with this device?

lmosenk · June 25, 2018, 1:07pm

Will try that thanks @mike.maxwell.

ajpri1998 · June 25, 2018, 11:17pm

Here s the final code:

github.com

ajpri/ST-GoContWirelessSwitch/blob/Hubitat/devicetypes/ajpri/gocontrol-wireless-remote-switch.src/gocontrol-wireless-remote-switch.groovy

/**
 *  GoControl Wireless Remote Switch WA00Z-1
 *
 *  Copyright 2016 Austin Pritchett
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 *	
 */
 
 /*
 Hubitat Compatibility

This file has been truncated. show original

The above post was an unmodified SmartThings Handler

vtminhvt · June 27, 2018, 4:05am

patrick3 · July 20, 2020, 1:48pm

This driver worked great once I realized I just use an automation to make the button click trigger the lights. Thanks for doing this!

rkmiller · October 4, 2020, 4:58am

Sorry guys..... I still don't see from the posts above how to get both buttons to work on the Gocontrol WA00Z-1. I just bought this C7 that came with the Gocontrol packaged with it but it doesn't work????? what's up with that?

So far, this is not straight forward. Anyone that can share the steps to get both buttons recognized please share. Thanks

neonturbo · October 4, 2020, 5:31am

I guess maybe we should start at the beginning?

So you were able to figure out how to pair the device?
What driver (device type) did it choose when it paired? Go to the Device tab, select this device, and look about halfway down the page.
And did you look in the "states" in the upper right corner of that page, and see if it changes there when you push the buttons? This is critical, if it doesn't show up correct here, it won't work anywhere like in a rule or whatever.

From there, you have to decide what to do with the button. Can you describe how/what you expect the button to do, or turn on, or activate?

This is an example of a similar button (so don't make yours look like this) but here are the sections to look at that I mention above.

And by the way, welcome to Hubitat! Ask lots of questions before you get stuck, we will be glad to try and help.

DocBot · October 14, 2020, 5:08am

Hey man,

I think I had the same problem as you, where the GoControl switch, once paired, only offers 1 button to choose from, and the "numberofbuttons" in device settings = 1. I saw in another thread, an interesting solution proposed by @mike.maxwell, where you switch the driver to Virtual Button, then manually set number of buttons to =2, then revert back to whatever driver. You can use the custom driver made by @ajpri1998, or I find the Generic Zwave Button controller also works. You will then have two usable buttons. Not sure why this works.

brp · March 4, 2021, 8:05pm

Hi folks,
I'm also a Hubitat/Z-Wave newbie facing this issue. I bought one of these, saw "numberofbuttons" =1. Figured it was defective and bought another. Same issue, so cane searching. I see some suggestions here, but not quite sure how to apply them.

When I pair the device, it comes up as " Generic Z-Wave Button Controller" with 1 button. I see the comment about "switch the driver to Virtual Button, then manually set number of buttons to =2, then revert back to whatever driver." I've added a Virtual "Generic Z-Wave Button Controller" but not sure what to do next to manually set the number of buttons.

Not ready to start integrating code since I don't know how to do that as yet.

As background, I'm using the ButtonControllers App for this (as well as a Wallmote that works just fine).

Thanks for any newbie-speed steps here.

Cheers.

Edit: After playing some more I figured out what I was doing wrong. When I chose the proper driver it worked just as outlined.

DocBot · March 5, 2021, 12:42pm

Glad it worked out!

system · September 24, 2022, 10:56am

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.