This is the Sengled bulb I ordered. It is the same model that @toyanucci mentioned in an earlier post.
It would be great to have you analyze the traffic to see what is going on. Thanks!
https://www.amazon.com/gp/product/B01N7I4X94/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1
Just ordered one... Still have SmartThings in the basement so I'll capture that conversation and see what I find. 
It's also great for status...
Especially when troubleshooting failed automations..
Currently cluster 0006 reporting is disabled for bulbs, I am slowly working through a different reporting config for bulbs, when I get to testing this, I'll check what each of the bulbs I own report at mains on and off if anything.
I wrote about this issue a couple of weeks back. Thanks for adding the video @toyanucci to make the point.
I've got a couple of dumb switched smart bulb locations where the kids would turn these switches on and leave them on. Both locations don't have a neutral wire so it makes sense to leave them as is with a smart bulb.
I'd forgotten about having webcore rules that handled turning these smart bulbs off after x minutes if found on and how the state of these bulbs showed up properly in the Smartthings App. Over the years I had Cree, GE, and Sengled bulbs in these 2 figures. So the manufacturer of bulbs apparently did not matter.
As @toyanucci wrote this breaks automations and refreshing or polling as I'm doing now is not the answer.
I'll do the same when the Sengled arrives (unless you have one already). Since HE is not processing those reports, and ST is, my educated guess is the bulb is setting an on/off report when it loses power and the hub is not parsing it.
This should be an easy test by porting the generic ST Zigbee driver and seeing if that corrects the behavior.
ACKmySYN,
Another thanks for posting the example. I'm yet another Iris user looking for a home, wandering the forums trying to fully understand the options, and make a decision on a replacement system that has minimal impact to the WAF (Wife Acceptance Factor). Iris absolutely had it's faults, but I did not think finding a replacement would take this much effort. I'm trying to avoid two systems to close the gap with basic simple security and automation, but it's taking a good bit of research. And I will also say that the responsiveness of the Hubitat forums is nice.
Hey, probably no one will believe me but I ported the ST driver, installed it to a sengled color, clicked configure, it reports I turned it off and on in the dumb switch!
/**
* Copyright 2015 SmartThings
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
* for the specific language governing permissions and limitations under the License.
*
*/
metadata {
definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light", runLocally: true, minHubCoreVersion: '000.019.00012', executeCommandsLocally: true) {
capability "Actuator"
capability "Configuration"
capability "Refresh"
capability "Switch"
capability "Switch Level"
capability "Health Check"
capability "Light"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0019", manufacturer: "Aurora", model: "LCBulb01UK", deviceJoinName: "Aurora AOne Control Dimmer (120w)"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0019", manufacturer: "LEEDARSON LIGHTING", model: "M350ST-W1R-01", deviceJoinName: "OZOM Dimmable LED Smart Light"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0003", manufacturer: "Aurora", model: "Dimmer", deviceJoinName: "Aurora AOne Control Dimmer (320w)"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM 10 Year", deviceJoinName: "SYLVANIA Smart 10-Year A19"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E11-G13", deviceJoinName: "Sengled Element Classic"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E11-G14", deviceJoinName: "Sengled Element Classic"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E11-G23", deviceJoinName: "Sengled Element Classic"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E11-G33", deviceJoinName: "Sengled Element Classic"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E12-N13", deviceJoinName: "Sengled Element Classic"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E12-N14", deviceJoinName: "Sengled Element Classic"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E12-N15", deviceJoinName: "Sengled Element Classic"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL6HD", deviceJoinName: "Leviton Dimmer Switch"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL3HL", deviceJoinName: "Leviton Lumina RF Plug-In Dimmer"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL1KD", deviceJoinName: "Leviton Lumina RF Dimmer Switch"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, 0B05, FC01, FC08", outClusters: "0003, 0019", manufacturer: "LEDVANCE", model: "A19 W 10 year", deviceJoinName: "SYLVANIA Smart 10Y A19 Soft White"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0003, 0019", manufacturer: "LEDVANCE", model: "BR30 W 10 year", deviceJoinName: "SYLVANIA Smart 10Y BR30 Soft White"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0003, 0019", manufacturer: "LEDVANCE", model: "PAR38 W 10 year", deviceJoinName: "SYLVANIA Smart 10Y PAR38 Soft White"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "ZSD07", deviceJoinName: "Leviton Lumina RF 0-10V Dimming Wall Switch"
fingerprint profileId: "0104", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, FFFF, 1000", outClusters: "0019", manufacturer: "LDS", model: "ZBT-DIMLight-GLS0000", deviceJoinName: "A60 Dim Bulb"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0019", manufacturer: "LDS", model: "ZHA-DIMLight-GLS0000", deviceJoinName: "A60 Dim Bulb"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "LDS", model: "ZBT-DIMLight-GLS", deviceJoinName: "A60 Dim Bulb"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "LDS", model: "ZBT-DIMLight-GLS0044", deviceJoinName: "智能球泡灯(可调光版)"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0009", outClusters: "0019", manufacturer: "Aurora", model: "FWMPROZXBulb50AU", deviceJoinName: "Aurora MPro"
fingerprint profileId: "0104", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, FFFF, 1000", outClusters: "0019", manufacturer: "Aurora", model: "FWBulb51AU", deviceJoinName: "Aurora Smart Dimmable"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0019", manufacturer: "Aurora", model: "FWStrip50AU", deviceJoinName: "Aurora Dimmable Strip Controller"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05, 1000, FEDC", outClusters: "000A, 0019", manufacturer: "Aurora", model: "FWGU10Bulb50AU", deviceJoinName: "Aurora Smart Dimmable GU10"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05, 1000, FEDC", outClusters: "000A, 0019", manufacturer: "Smarthome", model: "S111-201A", deviceJoinName: "Leedarson Dimmable White Bulb A19"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "innr", model: "RB 265", deviceJoinName: "Innr Smart Bulb White"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "innr", model: "RB 245", deviceJoinName: "Innr Smart Candle Warm White"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "innr", model: "RS 225", deviceJoinName: "Innr Smart Spot White"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E11-N13", deviceJoinName: "Sengled Element Classic"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E11-N14", deviceJoinName: "Sengled Element Classic"
}
tiles(scale: 2) {
multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
}
tileAttribute ("device.level", key: "SLIDER_CONTROL") {
attributeState "level", action:"switch level.setLevel"
}
}
standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
}
main "switch"
details(["switch", "refresh"])
}
}
// Parse incoming device messages to generate events
def parse(String description) {
log.debug "description is $description"
def event = zigbee.getEvent(description)
if (event) {
if (event.name=="level" && event.value==0) {}
else {
sendEvent(event)
}
} else {
def descMap = zigbee.parseDescriptionAsMap(description)
if (descMap && descMap.clusterInt == 0x0006 && descMap.commandInt == 0x07) {
if (descMap.data[0] == "00") {
log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
} else {
log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
}
} else if (device.getDataValue("manufacturer") == "sengled" && descMap && descMap.clusterInt == 0x0008 && descMap.attrInt == 0x0000) {
// This is being done because the sengled element touch/classic incorrectly uses the value 0xFF for the max level.
// Per the ZCL spec for the UINT8 data type 0xFF is an invalid value, and 0xFE should be the max. Here we
// manually handle the invalid attribute value since it will be ignored by getEvent as an invalid value.
// We also set the level of the bulb to 0xFE so future level reports will be 0xFE until it is changed by
// something else.
if (descMap.value.toUpperCase() == "FF") {
descMap.value = "FE"
}
sendHubCommand(zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, "FE0000").collect { new hubitat.device.HubAction(it) }, 0)
sendEvent(zigbee.getEventFromAttrData(descMap.clusterInt, descMap.attrInt, descMap.encoding, descMap.value))
} else {
log.warn "DID NOT PARSE MESSAGE for description : $description"
log.debug "${descMap}"
}
}
}
def off() {
zigbee.off()
}
def on() {
zigbee.on()
}
def setLevel(value) {
def additionalCmds = []
if (device.getDataValue("model") == "iQBR30" && value.toInteger() > 0) { // Handle iQ bulb not following spec
additionalCmds = zigbee.on()
} else if (device.getDataValue("manufacturer") == "MRVL") { // Handle marvel stack not reporting
additionalCmds = refresh()
}
zigbee.setLevel(value) + additionalCmds
}
/**
* PING is used by Device-Watch in attempt to reach the Device
* */
def ping() {
return zigbee.onOffRefresh()
}
def refresh() {
zigbee.onOffRefresh() + zigbee.levelRefresh()
}
def installed() {
if (((device.getDataValue("manufacturer") == "MRVL") && (device.getDataValue("model") == "MZ100")) || (device.getDataValue("manufacturer") == "OSRAM SYLVANIA") || (device.getDataValue("manufacturer") == "OSRAM")) {
if ((device.currentState("level")?.value == null) || (device.currentState("level")?.value == 0)) {
sendEvent(name: "level", value: 100)
}
}
}
def configure() {
log.debug "Configuring Reporting and Bindings."
// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
// enrolls with default periodic reporting until newer 5 min interval is confirmed
sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
refresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
}Sure would like to have that driver or a link to it.
Awesome! I believe you, but I have to try it for myself tonight when I get home.
Please share the ported driver. Thanks!
I just added the driver in my post.
To make sure I understand... you ported the non-color driver, and are using it with a color bulb just for testing, correct?
Have you tried to port the color bulb driver as well?
Yes,
I don't know where is the color driver for sengled. I can try.
Don’t use that example as is! Like I said I don’t know what I am really doing with RM lol. I don’t think it is doing what I actually want. But it does show that it’s not hard, it’s logic, but trying to wrap my head around a few things RM is causing me a few issues.
I am trying to essentially roll a bunch of Simple Lighting rules into one RM after I realized that I am going to need to do that or I was going to have hundreds of Simple and Motion Lighting App rules in less than a day.
The built in Simple Lighting and Motion Light Apps are super easy and effective. RM is super capable and effective, just more complex.
I think this is probably the correct Color RGBW driver...
I'll try it out when my bulb comes on Thursday. At this point there's probably no point in sniffing the traffic since I think we all know what needs to happen based on @mike.maxwell comments and the behavior of your ported driver.
And I was so looking forward to the experiment too.
I did the port and the on and off on the dumb switch report works too, but changing the colors doesn't work for me, tried on another bulb, so now I have 2 color bulbs, one with the classic driver and the other with the color driver.
/**
* Copyright 2017 SmartThings
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
* for the specific language governing permissions and limitations under the License.
*
* Author: SmartThings
* Date: 2016-01-19
*
* This DTH should serve as the generic DTH to handle RGBW ZigBee HA devices
*/
metadata {
definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", runLocally: true, minHubCoreVersion: '000.019.00012', executeCommandsLocally: true) {
capability "Actuator"
capability "Color Control"
capability "Color Temperature"
capability "Configuration"
capability "Refresh"
capability "Switch"
capability "Switch Level"
capability "Health Check"
capability "Light"
attribute "colorName", "string"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0702,0B05,FC03,FC04", outClusters: "0019", manufacturer: "sengled", model: "E11-N1EA", deviceJoinName: "Sengled Element Color Plus"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0702,0B05,FC03,FC04", outClusters: "0019", manufacturer: "sengled", model: "E12-N1E", deviceJoinName: "Sengled Element Color Plus"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart RGBW Flex"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01, FC08", outClusters: "0003, 0019", manufacturer: "LEDVANCE", model: "RT HO RGBW", deviceJoinName: "SYLVANIA Smart RT HO RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "FLEX Outdoor RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "FLEX RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "BR30 RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "Outdoor Pathway RGBW", deviceJoinName: "SYLVANIA Outdoor Pathway Full Color"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B05, FC01", outClusters: "0019", manufacturer: "LEDVANCE", model: "Flex RGBW Pro", deviceJoinName: "SYLVANIA Smart Flex 11 RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300, FFFF, 1000", outClusters: "0019", manufacturer: "Aurora", model: "RGBBulb51AU", deviceJoinName: "Aurora RGBW GLS Lamp"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FFFF", outClusters: "0019", manufacturer: "Aurora", model: "RGBBulb51AU", deviceJoinName: "AOne Smart RGBW GLS Lamp"
fingerprint profileId: "0104", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300", outClusters: "0019", manufacturer: "LEEDARSON LIGHTING", model: "5ZB-A806ST-Q1G", deviceJoinName: "Ozom Multicolor Smart Light"
fingerprint profileId: "0104", inClusters: "0000, 0004, 0003, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", manufacturer: "innr", model: "RB 285 C", deviceJoinName: "Innr Smart Bulb RGBW"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05, FC03", outClusters: "0019", manufacturer: "sengled", model: "E11-U3E", deviceJoinName: "Sengled Element Color Plus"
fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05, FC03", outClusters: "0019", manufacturer: "sengled", model: "E11-U2E", deviceJoinName: "Sengled Element Color Plus"
}
// UI tile definitions
tiles(scale: 2) {
multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
}
tileAttribute ("device.level", key: "SLIDER_CONTROL") {
attributeState "level", action:"switch level.setLevel"
}
tileAttribute ("device.color", key: "COLOR_CONTROL") {
attributeState "color", action:"color control.setColor"
}
}
controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
state "colorTemperature", action:"color temperature.setColorTemperature"
}
valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
state "colorName", label: '${currentValue}'
}
standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
}
main(["switch"])
details(["switch", "colorTempSliderControl", "colorName", "refresh"])
}
}
//Globals
private getATTRIBUTE_HUE() { 0x0000 }
private getATTRIBUTE_SATURATION() { 0x0001 }
private getHUE_COMMAND() { 0x00 }
private getSATURATION_COMMAND() { 0x03 }
private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
// Parse incoming device messages to generate events
def parse(String description) {
log.debug "description is $description"
def event = zigbee.getEvent(description)
if (event) {
log.debug event
if (event.name == "level" && event.value == 0) {}
else {
if (event.name == "colorTemperature") {
setGenericName(event.value)
}
sendEvent(event)
}
}
else {
def zigbeeMap = zigbee.parseDescriptionAsMap(description)
def cluster = zigbee.parse(description)
if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
if(zigbeeMap.attrInt == ATTRIBUTE_HUE){ //Hue Attribute
state.hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
runIn(5, updateColor, [overwrite: true])
}
else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
state.saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
runIn(5, updateColor, [overwrite: true])
}
}
else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
if (cluster.data[0] == 0x00){
log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
}
else {
log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
}
}
else {
log.info "DID NOT PARSE MESSAGE for description : $description"
log.debug zigbeeMap
}
}
}
def updateColor() {
sendEvent(name: "hue", value: state.hueValue, descriptionText: "Color has changed")
sendEvent(name: "saturation", value: state.saturationValue, descriptionText: "Color has changed", displayed: false)
}
def on() {
zigbee.on()
}
def off() {
zigbee.off()
}
/**
* PING is used by Device-Watch in attempt to reach the Device
* */
def ping() {
return zigbee.onOffRefresh()
}
def refresh() {
zigbee.onOffRefresh() +
zigbee.levelRefresh() +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
zigbee.onOffConfig(0, 300) +
zigbee.levelConfig()
}
def configure() {
log.debug "Configuring Reporting and Bindings."
// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
// enrolls with default periodic reporting until newer 5 min interval is confirmed
sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
refresh()
}
def setColorTemperature(value) {
value = value as Integer
def tempInMired = Math.round(1000000 / value)
def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
zigbee.command(COLOR_CONTROL_CLUSTER, 0x0A, "$finalHex 0000") +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
}
//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
def setGenericName(value){
if (value != null) {
def genericName = "White"
if (value < 3300) {
genericName = "Soft White"
} else if (value < 4150) {
genericName = "Moonlight"
} else if (value <= 5000) {
genericName = "Cool White"
} else if (value >= 5000) {
genericName = "Daylight"
}
sendEvent(name: "colorName", value: genericName)
}
}
def setLevel(value) {
zigbee.setLevel(value)
}
private getScaledHue(value) {
zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
}
private getScaledSaturation(value) {
zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
}
def setColor(value){
log.trace "setColor($value)"
zigbee.on() +
zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
}
def setHue(value) {
zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
}
def setSaturation(value) {
zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
}
def installed() {
if (((device.getDataValue("manufacturer") == "MRVL") && (device.getDataValue("model") == "MZ100")) || (device.getDataValue("manufacturer") == "OSRAM SYLVANIA") || (device.getDataValue("manufacturer") == "OSRAM")) {
if ((device.currentState("level")?.value == null) || (device.currentState("level")?.value == 0)) {
sendEvent(name: "level", value: 100)
}
}
}It updates immediately? If so that's great! Now for you to fix the iris keypad issue 
Download the Hubitat app
