Hi! I bought 3 Tuya Repeaters, as recommended in this post [image] Zigbee Mini Repeaters (Tuya) - Shout Out 💬 Lounge I thought I'd give a shout out to these little Zigbee repeaters. I added 4 of these to my network about a year ago and they have been a great addition and…

There's a button at the top of the device page labelled "initialize" which needs to be pressed when it is created with a new driver. This applies to most devices when first created.

Have you tried this community driver (with a "Wipe"): [image] [RELEASE] Zigbee Monitor Driver - Like XRAY Vision for Zigbee Repeaters and simple Switches Custom Drivers Intro I bought 4 dedicated USB mini Zigbee repeaters a few months ago to bolster my network. I’m the au…

I did not know that driver, i will test it and report back.

I removed power 3 times to pair it, if that is what you mean?

[image] rocketwiz: There's a button at the top of the device page labelled "initialize" which needs to be pressed when it is created with a new driver. This applies to most devices when first created. Thanks, i was not aware of that. :+1:

ive had 2 of 4 of these drop off the mesh and require power down reboot.. cannot recommend them.. especially when in a remote hub.

I have one in each room. No driver is needed. ‘Device’ is fine.

Markus's driver has presence which is handy to see if it's dropped off (However I don't recall any issues with them over the last few years).

It appears you have switched drivers and old schedules from the prior driver exist. Change to "Device" driver and delete all states and schedules . Then load this driver: https://raw.githubusercontent.com/kkossev/hubitat-Markus-Li-fork/release/drivers/expanded/zigbee-generic-repeater-expanded.groo…

After i switched to the Zigbee Monitor Driver, did a wipe then an initialize, it looks like the error in the logs has disappeared. I actually think the initialize would have fixed it, regardless of the driver. It also looks like the devices acts as repeaters to some other devices according to the l…

Tuya Zigbee Repeater issues

Get Help Devices

Ranchitat January 29, 2024, 8:06am 2

Have you tried this community driver (with a "Wipe"):