Trouble Connecting Zooz Water Sensor ZSE42

I'm trying to rejoin my ZSE42. I'm very near a Honeywell T6 Pro Z-Wave thermostat that is paired directly to the hub. I get this far and nothing else happens.

Any suggestions ?

Under settings-> z-wave look for device ID 50, and try hitting the discover button, otherwise looks like might have created a ghost entry

1 Like

Hey John Rob, I'm considering buying a bunch of these. Would've you recommend considering your experience with these?
Thanks and happy holidays!

I have 16 of the old ZSE42 and 5 of the new ZSE42 800LR version.

I like them.

That said I'm really glad they made the new 800LR version have a larger battery (CR2450). I get ~1 year on the old model, and am hoping for a lot more on the new ones.

The new model having ~2.5x more battery capacity and newer 800 chip which uses lower power should help a lot (CR2032=210-230 mAh, CR2450=620 mAh).

If the battery life scales as expected, I'll replace the old version with the new version over time.

EDIT: I will say that the 800LR model's plastic color is one of the ugliest blue tinted white I've seen... Would have preferred something more bone white. Luckily they are all in places I don't really look at them regularly.

1 Like

Alos upgraded my 42s (only have a few) from old 700 to new 800. No problems or hiccups at all with either version in terms of pairing (S2 in my case) or performance.

Upgraded for better battery capacity , better 800 battery performance, and much better water-seal design. Agree they are a pretty fugly blue, but I couldn't care less - they're all out of sight.

I don't recall if my original problem has anything to do with the ZSE42. However I have sense bought a bunch of them and am very happy with them.

If I would to need more sensors I would purchase more ZSE42's. That is unless I needed a device capable of using a remote sensor.

1 Like