Thanks @Hubitat_Staff for the v2.3.9.192 release.
Specifically for this:
* Fixed a bug that occasionally caused a new Z-Wave device to get stuck during initialization.
I've been struggling moving devices from my C8 to my C8 Pro. Because of some persistent ghosts on my primary C8, I had decided to move to my C8 Pro after much procrastination.
What a nightmare. Devices won't properly exclude from the C8, because of ghosts and the dreaded zwave is busy state. None of my zsticks will fully join the C8 mesh except in about 1 in 20 attempts. And then, after forcing a exclusion of the device, and a reset, they weren't completing inclusion on the C8 Pro. And the failed excludes? Unsurprisingly left me with more ghosts on the C8.
In two days I completed inclusion of 4 devices, and two were straight up replacements of the Zwave Dev with a Zigbee device in pure frustration!
Ultimately I learned that if I included a recently excluded/reset dev on the Pro, i could power cycle the hub. And on reboot the device would be present with an obviously hub assigned name.
Whew.
And just about then @gopher.ny pushed v2.3.9.192.
Sweet Baby Deity! I am saved!
Inclusions are once again fast and complete. THANK YOU!!!!!
