Talking about this item:
https://www.amazon.com/Treatlife-Assistant-Required-Waterproof-Dimmable/dp/B086V3S2Q7/ref=sr_1_16?dchild=1&keywords=treatlife+dp10&qid=1602692397&sr=8-16
Also sold as Todomio. I've got it working with the Treatlife app and Alexa but no connectivity with Hubitat. Are there other dimmable outlets out there that might be a place to start?
A thought, if you have it working with Alexa you should be able to create a virtual dimmer in HE, and then use that in Alexa to control the device. I.E. dimmer in HE changes, Alexa sees the change and sets the DP10 accordingly.
It looks like it can be flashed with tasmota.
Thanks for the replies - I've not worked with flashing with Tasmota. Found this video - similar process?
Sonoff Basic Configuration Flashing with Tasmota Firmware - YouTube (take switch apart, use USB>Serial interface and grounding pins on the Treatlife board as indicated).
Going virtual device path sounds a lot less involved, however the device isn't showing up in the HE Echo Skill as an available device. I've got to do some additional reading on this - haven't used virtual devices.
Similar, but more than likely you will have to solder wires directly to the chip temporarily for flashing.
https://tasmota.github.io/docs/devices/TYWE3S/
Tasmota devices work amazingly well with @markus - [RELEASE] Tasmota for HE - Auto-detecting Tasmota drivers + Tasmota firmware 7.x/8.x for HE (for use with Tuya, Sonoff and other ESP devices)
This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.
Download the Hubitat app
