Support for Treatlife DP10 Waterproof Dimmable Plug

Talking about this item:

Also sold as Todomio. I've got it working with the Treatlife app and Alexa but no connectivity with Hubitat. Are there other dimmable outlets out there that might be a place to start?

A thought, if you have it working with Alexa you should be able to create a virtual dimmer in HE, and then use that in Alexa to control the device. I.E. dimmer in HE changes, Alexa sees the change and sets the DP10 accordingly.

1 Like

It looks like it can be flashed with tasmota.

1 Like

Thanks for the replies - I've not worked with flashing with Tasmota. Found this video - similar process?
Sonoff Basic Configuration Flashing with Tasmota Firmware - YouTube (take switch apart, use USB>Serial interface and grounding pins on the Treatlife board as indicated).

Going virtual device path sounds a lot less involved, however the device isn't showing up in the HE Echo Skill as an available device. I've got to do some additional reading on this - haven't used virtual devices.

Similar, but more than likely you will have to solder wires directly to the chip temporarily for flashing.

Tasmota devices work amazingly well with @markus - [RELEASE] Tasmota for HE - Auto-detecting Tasmota drivers + Tasmota firmware 7.x/8.x for HE (for use with Tuya, Sonoff and other ESP devices)

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.