Has anybody installed/used one of the new Schlage Sense Pro™ Smart Deadbolt locks in Hubitat? I have toyed with the idea of getting one to replace an aging smart lock. It looks like it's not directly compatible with Hubitat but I didn't know if anybody was looking at a custom interface or HomeKit in…

It is a much more full featured lock compared to the Schlage.

You know that Grade 3 is the lowest grade, right?

Not an issue for me. And the Schlage is not much better at Grade 2. Plus, I have other deterrents.

I bought Sense Pro first day they were released. It replaced Encode Plus on my entrance door. It is Matter over Thread. (BTW I switched Encode to Thread and increased battery life at least 5x), but the biggest advantage of Sense Pro is UWB (like in U400). Schlage states that it will support Aliro,…

[image] juker: I bought Sense Pro first day they were released. Have you integrated this into Hubitat? [image] jkudave: go with the Aqara U400. This does integrate into Hubitat as long as you use a TBR, correct?

[image] aaiyar: This does integrate into Hubitat as long as you use a TBR, correct? Correct.

Integration to Hubitat is limited to basic functionality, see DGBQ's reply to the original post. If you need basic lock/unlock - than sure. If you need codes management - Apple security won't allow it.

[image] juker: Integration to Hubitat is limited to basic functionality, see DGBQ's reply to your original post. Not the original poster. I know that platform 2.5.1 added support for the U400. Perhaps @jkudave can add if that support extends to user code management, or if it is just lock/unl…

Thanks for all the good info…. This community is why Hubitat excels above the rest in my opinion…..

Mike Maxwell added a dedicated Matter driver for Aqara U400 in the latest HE platform release, Including lock codes support via LCM. It works also with U200 models.