Releasing Zemismart Zigbee Blind Driver. This is a version adapted from mark.cockcroft 's driver with additional support for mode and speed which is available in the AM43-0.45/40-ES-EZ model. The same message patterns are used as previous ZemiSmart Zigbee Blind drivers, so it should also work with ot…

Hi All, I have this driver working on a Shaw Smart shade (re-badged Tuya). It is on a casement window (swings out to open) and I wanted to put in a lock out to stop the shade moving if the window is in the "open" position. I have used a contact sensor to determine if the window is open and had p…

Hi Callum, On/Off is exposed by the driver because the driver implements the capability 'Switch'. On/Off activating Open/Close is the correct behaviour. If you are wanting to limit when the window can be operated, or how far it can open, the easiest way is to create a Virtual Shade and use Rule Ma…

Hi Gradenko, Thanks for the confirmation and suggestion. The shades can also use an RF remote, and I was hoping to enact this rule to stop any operation if the windows was open, not just via a zigbee message/call/dashboard. I know the motors can be "powered off" by a long press of the remote or t…

[image] callumgw: But if this isn't available in the zigbee messages, that kills that as an idea. Most motors have a calibration procedure that sets the maximum open and maximum closed positions. This calibration is often done using the remote or a button on the motor controller. Does your de…

it does, but I want the shade not to move if the window is open. So if its up, stay up and if its down stay down. This is because I don't want the aluminium bar to catch on the lower part or a protruding window, stressing the motor or damaging the timber. Catching on the upper part when descendin…

I understand your use case now ... You can experiment with enabling/disabling the device from an RM5 rule : [image] Enable/Disable device via RM 5.1 📐 Rule Machine® Right here: [Screen Shot 2021-10-10 at 4.57.29 PM] Sorry @bertabcd1234 , you missed that one. It was ad…

A dedicated driver for Tuya TS130F models and Sonoff MINI-ZBRBS can be found here : [image] [RELEASE] Zigbee Window Shade driver with positioning for modules/motors that don't report position Custom Drivers [RELEASE] Zigbee Window Shade/Blind (Timed) — Sonoff …

I purchased these Zemismart shade motors from Amazon, and when they pair with HE, they come up as Tuya temp sensors with clock (STRANGE), so I changed the driver to this FAMOUS driver, and I can control open/close, using the calibrate/zm85 to set upper and lower limits, and clear the limits, and it …

Hi @pomonabill220 , Zemismart is primarily a trading company, that sells probably more than 30 different models motors, all made by various unknown Chinese manufacturers. All of these motors are labeled 'Zemismart,' but they are controlled differently. That's why some newly produced motor controls …

OOPS!!! Sorry about that! Here is the copy/paste of the info you requested: Device Data Show raw names Application 50 Endpoint Id 01 Manufacturer _TZE284_3mzb0sdz Model TS0601

[RELEASE] Zemismart Zigbee Blind Driver

Custom Apps and Drivers Custom Drivers

kkossev January 28, 2026, 8:45pm 539

I understand your use case now ...

You can experiment with enabling/disabling the device from an RM5 rule :