Krassimer, next test; (thumbs up, driver works fine on HE 2.3.4.133)
- modelGroup : TS0601_Tuya
- lastRx : {"tempTime":1674057291773,"humiTime":1674057291987,"tempCfg":"-1,-1,-1","humiCfg":"-1,-1,-1"}
- stats : {"rxCtr":29,"txCtr":0,"rejoins":1}
- driverVersion : 1.2.0 2023/01/15 12:42 PM
Shows up after easy pairing in HE (i had to select the driver manually, so i took the hum / temp / illum)
After exposing it to homekit i get the following
Some strange things.
-
Same driver as the scene controller, but the TS0601 does push the correct battery status to HK.
-
The device exposes the lux value from the driver as 0 lux value to HK because the device doesnt have that functionality. In HE is shows up on the dashboard as “unknown” as per picture below. Actually the TS0601 has sensors for temp (you can switch between F and C) and humidity presented in % (RH).
Sensor refresh every 30 seconds.
Also there is a smiley on the LCD (2 states) depicting a sad face with humidity either under 39 or above 70%. 40-69% give a happy face.
#So…. Could there be something in the driver that pushes the battery level
# of the scene controller wrong to HK?And… can you add support for the TS0601 (so without illuminnce) based in the current driver that apparently works besides the unknown / 0 lux message?
