New release 1.7.7:
"releaseNotes": "Modified reinstall confirmation step (reset after 5 min.), added a switch for normal or inverted alarm NO/NC behavior, defaults to legacy (inverted), added logical operators and water/pressure capabilities to analog child",
To execute the reinstall command, you now have to first enable the "Enable 'reinstall" toggle switch and then "save preferences. The reinstall command will then be "live" for 5 minutes, after which the toggle will revert back to disabled.
The inputs, when configured as normally open or closed alarms were inverted when I first implemented the driver (normally open was normally closed and vice-versa). A new toggle switch was added to either keep that behavior or select a normal one. It defaults to the legacy behavior (inverted).
For the analog child, I added the water and pressure capabilities as well as some logical operators for the equations (and, or, not ). I now use an implant for a radon sump fan pressure sensor and another one for a water leak rope sensor.