This is a new thread for the Aqara P1 Motion Sensor, that are supported by the Aqara P1 Motion Sensor driver initially published here . As this driver supports several different models of Aqara motion sensors, mixing the updates and the comments for the different devices is somewhat confusing for mos…

Versions history [image] [RELEASE] Aqara / Xiaomi Motion Sensors driver Custom Drivers Versions history ver. 1.0.0 2022-06-24 - first test version ver. 1.1.0 2022-06-30 - decodeAqaraStruct; added temperatureEvent; RTCGQ13LM; RTCZCGQ11LM (FP1) parsing ver. 1.1…

Could you please advise regarding the raised alerts for spammyDevices: [image] ▶ Device info ▶ Log Thanks

Hi @iEnam , HE 'spammy device' alert feature has done a very good job in your case! Yes, there is something wrong with the way this P1 sensor was paired to HE ( the application should be 06, not that long string). The 'application' value is filled in by Hubitat system during the device discovery …

Thanks for the quick reply. I have deleted and paired it again. ▶ Data ▶ Preferences ▶ Logs

Seems OK now. With 'Motion retrigger interval' of 5 seconds and 'Motion Reset Timer' of 25 seconds, you should be able to see much longer motion detection periods, if the P1 sensor is activated again from a movement between the 5th and the 25th second. With my rather agressive settings ( 1 second …

I also emulated your aggressive settings of 1 second retriggering and 15 seconds reset. I believe that my post above, 2 days ago, is also based on an 1 second retriggering. Unfortunately, I received another pushover alert yesterday. Could it be the 1 second retriggering causing the issue? Thanks …

Most probably the 1 second re-triggering time is outside of the device specifications… if you set the parameter to 2 seconds, does it stop sending motion events?

Thanks, I will test later today.

@kkossev , I have updated to 2 seconds, see logs below. Note that the default and minimum detection interval on Zibgee2MQTT is 2 seconds. Also, the 18no. instances on the 10th December is when we had a lot of traffic in the hallway corridor due to kids running around all evening :joy: Will see if …

[RELEASE] Aqara P1 Motion Sensor (RTCGQ14LM)

Custom Apps and Drivers Custom Drivers

kkossev December 23, 2022, 10:19am 2