Release 2.3.5 Available

Release 2.3.5.104 Available

Changes from 2.3.5.103

Bug Fixes

  • Added extra Zigbee logging for C8 hubs.
  • Modified cloud backup to skip Zigbee backup if a Zigbee network was never configured on the hub.
16 Likes

Release 2.3.5.105 Available

Changes from 2.3.5.104

Bug Fixes

  • Added an endpoint to reset and restore Zigbee on C8 hubs.
  • Added database flush before running backup to pick the very latest updates.
13 Likes

Release 2.3.5.109 Available

Changes from 2.3.5.105

Bug Fixes

  • Added logic to automatically recreate Zigbee network when Zigbee is stuck on INITIALIZING (C8 only).
  • Added options to manually recreate Zigbee network on Settings - Zigbee details page or automatically upon every hub reboot (C8 only).
  • Fixed possible delayed update of hub variable.
  • Added DNS safeguard to prevent hub dropping cloud connection on router reboot.
15 Likes

Release 2.3.5.110 Available

Changes from 2.3.5.109

Bug Fixes

  • Fixes for Zigbee "rebuild network" logic for C8 hubs.
  • Rule 5.1:
    • Fixed an error for Delay Per Mode.
    • Fixed an error for certain corrupted rules involving time variables (line 6359).
  • CT100 thermostats: Fixed setting setpoints after thermostat mode is set in multi-command cases from Thermostat Scheduler, Rule 5.1 or Basic Rule.
12 Likes

Release 2.3.5.113 Available

Changes from 2.3.5.110

Bug Fixes

  • Possible fixes for C8 Zigbee device join and rejoin issues.
  • Possible fixes for C8 Zigbee devices falling off the network and not rejoining on their own.
  • Thermostat Scheduler: Fixed ignoring EcoMode when variable setpoint is used.
  • Fixed detection of network disconnects on C8 hubs.

Platform Changes

  • Added migration specific links for migration ready backups on Backup and Restore page.
20 Likes

Release 2.3.5.117 Available

Changes from 2.3.5.114

Bug Fixes

  • Fixed Hue V1 motion sensors not joining on C8 hubs.
  • Probably fixed Hue V1 motion sensors falling off network and not rejoining C8 networks as they should.*
  • Rule 5.1: Fixed an error thrown after certain editing of actions (line 2608), breaking rule UI.
  • Disabled WiFi power management to prevent disconnects.
  • CT32 Thermostat: Possibly fixed problem with setting a setpoint after setting thermostatMode.

*NOTE: some devices that fell off the network may require factory resetting before they can join the Zigbee network again.

18 Likes

Release 2.3.5.118 Available

Changes from 2.3.5.117

Bug Fixes

  • Zigbee stability tweaks for C8.
15 Likes

Release 2.3.5.121 Available

Changes from 2.3.5.118

Bug Fixes

  • Rule 5.1:
    • Fixed triggers for Custom Attribute where changed failed to trigger the rule..
    • Fixed Wait timeout mistakenly cancelled at midnight when Required Expression involves sunset/sunrise.

Platform Changes

  • Added a separate migration workflow in Get Started screen.
  • Removed Zigbee stack selection endpoint.
  • DHCP DNS server overrides can now be cleared.
17 Likes

Release 2.3.5.123 Available

Changes from 2.3.5.121

Bug Fixes

  • Stopping Zigbee inclusion also stops runaway Zigbee device initialization issue on C8.
  • DateTime Connector: Fixed setting time when no date, causing date value to be wiped out with invalid value.
  • Button Controller: Fixed Actions with long text overflowing the table.
  • Schlage BE468/BE469 Lock driver includes an option to silence "Door Operation Reports" which can return inaccurate digital/physical event parameters.

Platform Changes

  • Added a Zigbee "legacy" inclusion mode for C8 hubs. The inclusion process suggests this mode only if a device starts initializing but never finishes.
  • Group Bulb dimmer now supports the changeLevel capability.
  • Room Lights Activator devices now support changeLevel capability.
22 Likes

Release 2.3.5.124 Available

Changes from 2.3.5.123

Bug Fixes

  • Fixed Zigbee inclusion stuck on initializing for Third Reality motion sensor and other devices.
  • Dashboard: Fixed not being able to remove Set Modes pin.
18 Likes

Release 2.3.5.125 Available

Changes from 2.3.5.124

Bug Fixes

  • Fixed the issue causing non-responding devices following Zigbee migration.
  • Notify: Fixed setting Hub Variable In Use By, and support for Hub Variable rename.
  • Rule Machine: Fixed an error thrown attempting to import Basic Rule or Simple Automation Rule.
22 Likes

Release 2.3.5.130 Available

Changes from 2.3.5.125

New Devices

  • Add Lutron Shade Remote (4 group model CS-YJ-4GC-WH)

Bug Fixes

  • Bond Integration:
    • Fixed supported fan speeds not updating for fan device.
    • Added custom increaseSpeed and decreaseSpeed commands.
    • Populate missing fanspeed names for 6 speed fans and above.
    • Fixed cycleSpeed command getting 'stuck' at certain speeds.
    • Fixed occasional issue of initial device state not populating fully.
  • Rule 5.1:
    • Fixed error on line 1754.
    • Fixed displaying Done with Trigger Event button when **Any Value** selected for Comparison.
  • HSM Rule: Fixed to use both() command for sirens when both siren and strobe are selected for the alert.
  • Fixed "unable to restore" issue on large migration backups.
  • Room Lights: Fixed turning off lights if time period change adjusts lights during pending off.

Platform Changes

  • Zigbee device joining and monitoring tweaks; default Zigbee power level on C8 changed to 8 (value explicitly set by user is not overridden).
  • Added logic to use default DNS servers if DHCP does not provide any.
21 Likes

Release 2.3.5.131 Available

Changes from 2.3.5.130

New Drivers

  • SinopĆ© water heater controller.

New App Features

  • Room Lights:
    • Added earlier/later of two times for time periods.
    • Added variable elapsed time as Means to Turn Off.

Bug Fixes

  • Fixed dropped WiFi connectivity issue when WiFi router and hub are rebooted around the same time.
  • Button Rule: Fixed losing it's trigger subscription button number when the first condition is deleted.

Platform Changes

  • Added a toggle to turn off polling of quiet Zigbee devices on the Zigbee details page.
  • Cleaned up /hub/zigbee/getChildAndRouteInfo page on C8 hubs.
17 Likes

Release 2.3.5.135 Available

Changes from 2.3.5.131

Bug Fixes

  • Fixed Hue v1 motion OTA update.

Platform Changes

  • All hub versions - added last Zigbee message timestamp and Zigbee message counter on Zigbee details page.
  • C8 only - added ping on/off toggles to individual devices on Zigbee details page, added explicit selection of Zigbee join modes and instructions on when to use them; made change in ZDO message handling.
  • Increased max hub variable value size to 1024 characters.
17 Likes

Release 2.3.5.138 Available

Changes from 2.3.5.135

New Devices

  • Add SinopĆ© tank Level Monitor

New App Features

  • Rule 5.1: Added increased/decreased by over selected amount for triggers.

Bug Fixes

  • Fixed Last Update Time to reflect the last time a message is received from a device (as opposed to the last time device attribute changed).
  • Fixed a source of memory leaks while doing cloud backups.
  • Basic Rule: Fixed Set Color action that causes UI crash.
  • Rule 5.1: Fixed trigger subscriptions incorrectly being created at initialization of a new rule even if Required Expression is false.

Platform Changes

  • Minor update for Zigbee library.
  • Modified WiFi reconnect to be more proactive immediately after reboot if initial WiFi connection attempt fails.
  • Some atomicState performance tweaks.
  • C8 only - hide Iris V1 inclusion and compatible devices.
22 Likes

Release 2.3.5.140 Available

Changes from 2.3.5.138

New App Features

  • WebCore updated to the latest version.

Bug Fixes

  • Room Lights: Fixed an error thrown when a controlled device is offline.
  • Rule 5.1:
    • Fixed an incorrect "Mismatched attribute value" for JSON attributes as strings.
    • Fixed an error thrown when a variable type is changed.
  • Onkyo, Denon and Pioneer AVR drivers:
    • Implemented missing sendMsg command.
  • Fixed rare LIFX crash when LAN connection is lost.
  • Possibly fixed growing delay between event and triggered rule execution.

Platform Changes

  • Tweaked WiFi for faster reconnection on router reboots.
24 Likes

Release 2.3.5.141 Available

Changes from 2.3.5.140

Bug Fixes

  • Fixed JavaScript error while trying to start cloud restore.
  • Rule 5.1: Fixed Event Subscriptions for Wait for Event for a button event.
15 Likes

Release 2.3.5.145 Available

Changes from 2.3.5.141

New Drivers

  • frient Water Leak Detector (FLSZB-110)
  • frient IO Module (IOMZB-110)

Bug Fixes

  • Zigbee multi endpoint switch: Ignore all F2 endpoints.
  • SmartSense Multi Sensor V4: Fixed parsing error.
  • Generic Zigbee dimmer: Fixed parsing error.
  • Rule 5.1: Fixed evaluating a Required Expression upon a paused rule being resumed by another rule.

Platform Changes

  • Graphical view of Zigbee and Z-Wave* networks (beta), available through the links on the Zigbee Details page and Z-Wave Details page, respectively. Note: Z-Wave graph is available on C7 and later hubs only. Many thanks to @dandanache for the original idea and code contribution!

*Z-Wave graphical view is only available to C-7 or newer hubs.

38 Likes

Release 2.3.5.146 Available

Changes from 2.3.5.145

Bug Fixes

  • Fixed empty/non-functional Zigbee devices graph on C7, C5, and C4 hubs.

Platform Changes

  • Usability enhancements for Zigbee and Z-Wave device graph pages.
27 Likes

Release 2.3.5.152 Available

Changes from 2.3.5.146

New Drivers

  • Yolax Zigbee Shade
  • Smartwings Zigbee Shade

New Apps

  • Color Animations - build and share animated color sequences for any RGB lights.

App Updates

  • WebCoRE updated to the latest available version.

Bug Fixes

  • Fixed Jasco Flood/Freeze Sensor humidity sensor value and added configuration parameters.
  • Rule 5.1: Fixed when more than one trigger with Stays for the same device custom attribute fails to cancel when it should.
  • Basic Rule: Fixed multiple switches all turn off as trigger, so that the rule fires rule only when all of them turn off instead of any.
  • HSM: Fixed arming Custom Rules upon Disarm (Custom Rules are disarmed by DisarmAll, as are Water and Smoke; Water, Smoke and Custom Rules should all be armed by Disarm).
27 Likes

Download the Hubitat app