Pioneer VSX telnet disconnect

I have 2 Pioneer VSX receivers and both of them work great for a couple days, but eventually the telnet disconnects but hubitat doesn't reaslize it and doesn't reconnect. Here is the log once it's broken showing it doesn't try and fix itself:


dev:1361
2019-08-08 09:59:18.658 pm debugtelnetStatus:send error: Broken pipe (Write failed)

dev:13612019-08-08 09:59:18.648 pm debuggetCommand- cmd:?M, str:?M

dev:13612019-08-08 09:59:18.604 pm debugtelnetStatus:send error: Broken pipe (Write failed)

dev:13612019-08-08 09:59:18.597 pm debuggetCommand- cmd:?P, str:?P

dev:13612019-08-08 09:59:18.562 pm debugtelnetStatus:send error: Broken pipe (Write failed)

dev:13612019-08-08 09:59:18.541 pm debugtelnetStatus:send error: Broken pipe (Write failed)

dev:13612019-08-08 09:59:18.537 pm debuggetCommand- cmd:?F, str:?F

dev:13612019-08-08 09:59:18.517 pm debuggetCommand- cmd:?V, str:?V

dev:13612019-08-08 09:59:18.479 pm debugtelnetStatus:send error: Broken pipe (Write failed)

dev:13612019-08-08 09:59:18.465 pm debuggetCommand- cmd:?M, str:?M

dev:13612019-08-08 09:59:18.454 pm debugtelnetStatus:send error: Broken pipe (Write failed)

dev:13612019-08-08 09:59:18.411 pm debuggetCommand- cmd:?P, str:?P

dev:13612019-08-08 09:59:18.381 pm debugtelnetStatus:send error: Broken pipe (Write failed)

dev:13612019-08-08 09:59:18.358 pm debuggetCommand- cmd:?F, str:?F

1 Like

Same issue here with a Pioneer Elite VSX-31; the telnet also breaks whenever the AVR is powered down as the NIC is disabled. When powering the AVR back on, HE doesn't reestablish the telnet without doing an Initialize again.

At the same time, the Mute/Unmute are backwards, or at least for this model.

Is the code exposed anywhere; would live to contribute back by helping fix this.

If someone does have the code, the reference for the telnet command API can be found here:

https://www.pioneerelectronics.com/StaticFiles/PUSA/Files/Home%20Custom%20Install/VSX-1120-K-RS232.PDF