aaiyar
September 18, 2022, 12:58pm
8
user2497:
Or the Iris V1 keypad
While there is no built-in driver for this, there is a community driver.
OK this is my iris v1 keypad I wrote. Got tired of waiting for and need to use my keypads.
I will be working on this more as time goes by but its working now. So if you have a Iris v1 keypad I would like you to try this and see if it works on yours.
tested on this firmware
firmware: 2013-06-28
firmware: 2012-12-11
firmware: 2012-06-08
v5.7 06/28/2022 Minor changes to stop the runaway countdown if disarmed on entry by another keypad or the app. As well as better logs
A was able to ge…
user2497:
IKEA motion sensors
Being zigbee 3.0 devices, these should work with the built-in Generic Zigbee Motion sensor driver. They may also work with the built-in driver for the Hue Motion sensor.
These make use of zigbee broadcasts and do not work with Hubitat as explained in the post linked below.
The devices are not compatible with Hubitat (see https://docs.hubitat.com/index.php?title=List_of_Compatible_Devices for a list known to work out of box, but many more can work with stock or custom drivers), and it's not just because there is no driver--they rely on odd behavior (group broadcasting only, at least for motion events) and it would require changes on the hub side. Here is some reading (yes, it's 2 years old, but there have been no significant Zigbee modfiications since then), and yo…
2 Likes
