I got a new C8-Pro Hubitat and followed the directions for booting it up wirelessly. The light turned from blue to green and I could see the wi-fi network but had issues connecting to the network. I decided to turn it off and follow the directions for connecting via Ethernet. However when I did t…

I don't understand how it could be crashing the router? You will need to get it connected to ethernet to attempt to get into the diagnostic tool. First try a network reset: Network Setup | Hubitat Documentation Then see if you can at least get it booted up to the blue LED without having router is…

Hi, I'm new here and had a similar issue with my hub. Have you tried resetting the hub? There's a small copper-coloured button on the underside of the hub. Press and hold it for 7-10 seconds (using a toothpick). The light will flash, and the hub will restart. Another problem I faced was using the F…

Thank you @jtp10181 and @corinnemallinson99 . I'm not sure what was going on with the router being taken down, but reseting the network let me move onto the next steps, hopefully it's smoother from here on out.

If you are going to use ethernet, make sure you clear out your wifi credentials in Hubitat's Network Settings. Hubitat can only use one or the other -- if using ethernet, wifi is (unfortunately) not available as fall-back / backup option, so removing any trace of wifi stuff in Network Settings help…

Agreed, :+1: to all of that as well.

Hubitat

New Hubitat, Stays Blue

Get Started Using C-8 Pro

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled