I have a APC ups that is monitored by a Raspberry PI using the APC program. I can check the ups from a CGI page when I am home and on the local lan. But the page won't load when I am away. Is there anyway to get the info from the cgi through a driver and into the HE?

I am not sure other ways, but it is possible to write a driver that monitors a webpage and parses the data on it. It is EASIEST if the data is represented using XML or JSON but depending on how far you are willing to go you can make a driver parse pretty much anything. For example, my Neptune Syste…

So far I found this: [image] GitHub - cometfish/hubitat_driver_growattsolarinverter: Read data from a Growatt... Read data from a Growatt Solar Inverter in Hubitat - GitHub - cometfish/hubitat_driver_growattsolarinverter: Read data from a Growatt Solar Inverter in Hubitat …

Does the ups have the network card. If so [image] APC SmartUPS Status Device Custom Drivers This is a device Handler to get the status of your APC Smartups that has the optional network card. It must be on your network with an ipaddress and have telnet enabled in the ne…

I wish it did. It is a little one

If you change to using NUT, you can use this: [Now with code for Nut discovery + UPS & outlet status] Support for UPS? , which is what I use and like. I have an APC as well and stopped using their software, as NUT is more broadly supported by other applications.

If your using node-red on your raspberry you could use node-red-contrib-apcaccess (node) - Node-RED then send that info to Hubitat.

I am using Nut and I have node red on the pi. Thanks guys!

I have NUT set up to notify me via text (sends email to my text number at Verizon using msmtp) for any UPS status changes I want to be aware of when away from home. It's easy to implement and has been very reliable. My network is all on multiple UPS (modem, router, AP, switches, Pi, etc.) so email a…

[image] Sha'ul ben Yeshua / Nut UPS Driver for Hubitat Nut discovery + UPS & outlet status for Hubitat Nut Tools @ https://networkupstools.org/ Original code @

Hubitat

Monitoring a UPS

Developers

sidjohn1 January 13, 2022, 9:10pm 3

QNAP NAS Integrations for UPS Monitoring, NodeRed, Home Bridge, etc Integrations

For those of you with a NAS, especially QNAP brand, I wanted to share ways that I am utilizing my NAS for various integrations. I don't have any familiarity with other NAS brands like Synology but I understand that many support Docker containers so these may be possible on those devices as well. Feel free to comment with other ways you are using your NAS for HE integrations. UPS Integration - I have a UPS connected via USB to my NAS. When power outages occur, I wanted the ability to automat…

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled