Kwikset lock won't add

[jtp10181]

@tonsofguns

It timed out again and I now have 2 ghosts and the entire zwave network is unresponsive for controls. I am getting updates when manually turning switches on and off. "Z-wave network responded with Busy message" is any time I try to control something via the hub.

This means you need to shut down the hub and unplug it.

@jtp10181

Z-Wave Issues

For partial or total loss of Z-Wave control (radio seems dead), before doing anything else please shut down the hub from settings and unplug for 30 seconds, then re-plug to boot back up. This will allow the radios to fully power down and restart. A regular reboot only restarts the platform and not the radio hardware.