I was experiencing some problems with my Iris V2 keypad since installing an AduroSmart ERIA Wireless Dimming Switch. I installed two of them yesterday. This morning, my Iris V1 keypad was showing lights changing from off to partial to on and back when I activated the keypad lights by placing my hand near it. It also was not responding. I removed the batteries and reset it that way and it seemed to be behaving. A while later, I looked again and the same thing was happening. I removed and re-paired the Eria switch nearest it.
I turned on debug logging and have been seeing these entries in the log:
dev:692019-04-16 11:25:18.824 infoskipped: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]], description:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01
dev:692019-04-16 11:25:18.819 debugdescMap: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]]
dev:692019-04-16 11:24:21.977 infoskipped: [raw:catchall: 0000 0006 00 00 0040 00 12BC 00 00 0000 00 00 04FDFF040101190000, profileId:0000, clusterId:0006, clusterInt:6, sourceEndpoint:00, destinationEndpoint:00, options:0040, messageType:00, dni:12BC, isClusterSpecific:false, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:00, data:[04, FD, FF, 04, 01, 01, 19, 00, 00]], description:catchall: 0000 0006 00 00 0040 00 12BC 00 00 0000 00 00 04FDFF040101190000
dev:692019-04-16 11:24:21.972 debugdescMap: [raw:catchall: 0000 0006 00 00 0040 00 12BC 00 00 0000 00 00 04FDFF040101190000, profileId:0000, clusterId:0006, clusterInt:6, sourceEndpoint:00, destinationEndpoint:00, options:0040, messageType:00, dni:12BC, isClusterSpecific:false, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:00, data:[04, FD, FF, 04, 01, 01, 19, 00, 00]]
dev:692019-04-16 11:23:18.660 infoskipped: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]], description:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01
dev:692019-04-16 11:23:18.656 debugdescMap: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]]
dev:692019-04-16 11:21:18.492 infoskipped: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]], description:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01
dev:692019-04-16 11:21:18.488 debugdescMap: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]]
dev:692019-04-16 11:19:18.317 infoskipped: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]], description:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01
dev:692019-04-16 11:19:18.308 debugdescMap: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]]
dev:692019-04-16 11:17:18.155 infoskipped: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]], description:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01
dev:692019-04-16 11:17:18.151 debugdescMap: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]]
dev:692019-04-16 11:17:02.224 infoLR Keypad is inactive
dev:692019-04-16 11:16:32.204 infoLR Keypad is active
dev:692019-04-16 11:16:32.186 debuggetMotionResult: active
dev:692019-04-16 11:16:32.180 debugdescMap: [raw:catchall: 0104 0501 01 01 0040 00 12BC 01 00 0000 07 00 , profileId:0104, clusterId:0501, clusterInt:1281, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:07, direction:00, data:[]]
dev:692019-04-16 11:15:18.005 infoskipped: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]], description:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01
dev:692019-04-16 11:15:18.001 debugdescMap: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]]
dev:692019-04-16 11:14:33.413 infoskipped: [raw:catchall: 0000 0006 00 00 0040 00 12BC 00 00 0000 00 00 03FDFF040101190000, profileId:0000, clusterId:0006, clusterInt:6, sourceEndpoint:00, destinationEndpoint:00, options:0040, messageType:00, dni:12BC, isClusterSpecific:false, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:00, data:[03, FD, FF, 04, 01, 01, 19, 00, 00]], description:catchall: 0000 0006 00 00 0040 00 12BC 00 00 0000 00 00 03FDFF040101190000
dev:692019-04-16 11:14:33.404 debugdescMap: [raw:catchall: 0000 0006 00 00 0040 00 12BC 00 00 0000 00 00 03FDFF040101190000, profileId:0000, clusterId:0006, clusterInt:6, sourceEndpoint:00, destinationEndpoint:00, options:0040, messageType:00, dni:12BC, isClusterSpecific:false, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:00, data:[03, FD, FF, 04, 01, 01, 19, 00, 00]]
dev:692019-04-16 11:13:46.726 infoLR Keypad is inactive
dev:692019-04-16 11:13:17.851 infoskipped: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]], description:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01
dev:692019-04-16 11:13:17.842 debugdescMap: [raw:catchall: 0104 0020 01 01 0040 00 12BC 01 00 0000 00 01 , profileId:0104, clusterId:0020, clusterInt:32, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:00, direction:01, data:[]]
dev:692019-04-16 11:13:16.718 infoLR Keypad is active
dev:692019-04-16 11:13:16.709 debuggetMotionResult: active
dev:692019-04-16 11:13:16.706 debugdescMap: [raw:catchall: 0104 0501 01 01 0040 00 12BC 01 00 0000 07 00 , profileId:0104, clusterId:0501, clusterInt:1281, sourceEndpoint:01, destinationEndpoint:01, options:0040, messageType:00, dni:12BC, isClusterSpecific:true, isManufacturerSpecific:false, manufacturerId:0000, command:07, direction:00, data:[]]
--- Live Log Started, waiting for events ---
What do these log entries mean? What can I do to make sure the keypad is working properly and will continue to do so?