Ikea Fyrtur and Hubitat?

[morningz]

I've been using a set of IKEA Fyrturs with my Hubitat for a few months now, they work great

This post (from the above linked thread) is where to get the driver from

Ikea Blinds

Try this driver. All I did was add the battery %. I didn't go back through to make make any of the other changes. I did confirm it compiles in Hubitat but since I don't have the blinds, I can't test it. /** * * * Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except * in compliance with the License. You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in w…

A few posts above this is this post which has the exact directions

Ikea Blinds

I got 3 blinds all mounted and set up due to the great info in this thread. In the package: 1 shade 2 mounting brackets 1 battery pack 1 USB A > Micro USB cable 1 Tradfri repeater - Zigbee 1 Remote Button - Zigbee There are no screws in the package for the mounting brackets. You need 4 screws for each set of shades as there are 2 brackets each. Step 1 - charge the battery pack. It’s 2,600 MAh and reports I’ve read state it should ‘last several months on a charge’. Step 2 - Pair the Tra…

The rest of the thread is a lot of noise, but those two posts are what you need