Hi
Got my new HE hub C7 before unfortunately before the C-8 was released.
Never mind, after taking decisions with HE,i want to strengthen coverage, so i flashed (Sonoff ZigBee bridge Pro) & trying to make it as a repeater but unfortunately, I couldn't pair it with Hubitat.
i tried to follow all the steps in GutHub and here : Sonoff Zigbee Bridge Simply as a Router in HE
it flashed successfully i assume but can't pair it with Hubitat and link it as a device ??
Chip Info:
- Chip Family: ESP32
- Chip Model: ESP32-D0WDQ5-V3 (revision 3)
- Number of Cores: 2
- Max CPU Frequency: 240MHz
- Has Bluetooth: YES
- Has Embedded Flash: NO
- Has Factory-Calibrated ADC: YES
- MAC Address: 40:22:D8:5F:4E:48
here it shows , flashed successfully
10:57:19.651 FLH: Starting verification of HEX file
10:57:29.898 FLH: Verification of HEX file OK
10:57:33.254 FLH: cc2652_flasher rx=23 tx=19 rst=15 bsl=22
10:57:33.293 FLH: Flashing started (takes 5 minutes during which Tasmota is unresponsive)
11:01:19.704 FLH: Flashing completed: OK
11:01:19.807 FLH: Flash crc32 0x000000 - 0x2FFFF = bytes('1598929A')
Those the files i uploaded
are these configurations correct??
