The Fortrezz dry contact units (Mimo2+ and Mimolite) have been popular on ST, has anyone successfully used them on HE? Are there any competitors I should be aware of? I see Aeon has a single channel dry contact sensor (ZW097-A) that seems to be sold out . . . Thanks!

It may not be obvious, but Qubino has a single channel dry contact too. [image] Flush 1D Relay - Qubino Do you often wonder if you closed the garage doors, after leaving home? Qubino Flush 1D Relay is the best solution to control your doors and gates. I've alway…

I think I used wrong terminology to describe what I am looking for. I would like something that can sense the status of a switch. My use case is to put wired sensors on some outdoor gates. I currently have a z-wave sensor in a piece of PVC tubing but while it is mostly weatherproof, the temperatu…

Just use any Door/Window 'Contact Sensor' that has external wire inputs.

Many of the magnetic door/window sensor on the market have a pair of dry contact sense points inside. https://discoverecolink.com/product/dwzwave2-eco/ There's a 2 wire header inside that receives a sensor. I have used it for a pressure switch (which is a resistive change) and to sense a Large (wa…

csteele: Thanks for that lead! I had done a similar thing with one of the early generation ST door/window sensors but the newer ones are not a friendly to modifications. The ST sensor didn't have screw terminals but the connection to the magnetic sensor was easily accessible so with a bit of solde…

ogiewon: I didn't realize these existed! Any recommendations? Thanks!

Does anyone know if there is a HE driver for either of the Fortrezz relay devices?

[image] Eric.C.Miller: ogiewon: I didn't realize these existed! Any recommendations? Thanks! Eric, Sorry! I just saw this question. Hopefully you’ve already found some of the contact sensors with external sensor terminals. The ones I have were part of an old GoControl kit sold at Home Depo…

Thank you. No problem. I found an Ecolink model that has screw terminals. Hope to hook it up this weekend. I will post results.

Fortrezz Mimo2+, Mimolite compatibility with HE?

Get Help

mike.maxwell June 26, 2019, 1:38pm 18

Built in support for the MIMO2+ will be included in platform version 2.1.2