DIY- Battery Backup Hubitat- under TEN bucks-NO soldering

[dJOS]

First round of design goals is here:

USB-C UPS designed by the community for Hubitat

Design goals: sit under Hubitat hub hold the hub in place without it getting hot compatible with USB-C chargers - DONE add a Status OK LED - DONE circuit to sense the Hub is powered down (just the red led) and remove power from the hub until mains power is back. This would allow the hub to be self starting. Zigbee Module to enable onboard power loss monitoring and graceful shutdown enable battery state reporting Feedback on these goals is very welcome, we fully intend to try and keep costs…